Nickel Morning Glory Horn (Victor/HMV)

[mariof]

Hi All,

So I've got my hands back on the Mahogany Victor V I mentioned in another thread (http://forum.talkingmachine.info/viewto ... =2&t=21095) but I am concentrating on the Nickel horn that came with it for the time being.

I had originally thought it was Nickel on brass but it appears to be Nickel on steel, what I thought was brass is actually the layer of copper underneath. The end section which the elbow connects to is in actual fact nickeled brass. (Tested with magnets).

The patent date stamped on the end of the horn has the year 1906.
I know that Nickeled steel horns were available from other manufacturers but these where usually 3rd party and of the witches' hat variety.

Pics are attached.

So my questions are:

1. Is 1906 the last year stamped on these type of horns (trying to figure out if it matches the late Mahogany Victor 5 it came on)?
2. There appears to be a clear finish over the nickel on the outside of the horn, what is the safest way to remove this without damaging the nickel underneath?
3. Has anyone seen another? Was it advertised in an original catalogue as an option.
4. Any thoughts?

Best Regards,
Mario

[phonogfp]

The patent date (October 9, 1906) reflects the U.S. Design Patent for "Horn," granted to Clement Beecroft and assigned to the Tea Tray Company. All Victor horns of this design were either manufactured by the Tea Tray Company or under its license.

George P.

[Starkton]

My first thought was that a painted horn had been stripped, and then copper- and nickel plated.

[martinola]

2. There appears to be a clear finish over the nickel on the outside of the horn, what is the safest way to remove this without damaging the nickel underneath?

Hi Mario.

If the clear finish was lacquer, then lacquer thinner would be the way to go. You may need a toothbrush and/or 0000 steel wool. I'd go very carefully so as not to scratch it. Obviously experimentation would be in order. It looks pretty good, I'd be tempted to leave it as-is. I guess it depends on your personal taste and what everything else looks like. Good luck with this very cool horn!

Martin

[mariof]

Hi All, after having had this horn for a number of years, it is now posted for sale on eBay. Kindest Regards, Mario

https://rover.ebay.com/rover/0/0/0?mpre ... 3960697631