Does anyone out there have motor parts (gears and a crank, of course) for a Boston Talking Machine Co. "Little Wonder" Phonograph? I'm quite sure that these are far and few in between, indeed! If not the actual parts, a photo of the motor with the plate removed? If all else fails, contact info. for a reputable machinist, who is reasonable?
Thank-you Kindly,
Stephen Lavoie, aka tuberecuds
WANTED: Little Wonder Phonograph Parts
-
tuberecuds
- Victor Jr
- Posts: 40
- Joined: Mon Jan 26, 2015 7:18 pm
-
JerryVan
- Victor Monarch Special
- Posts: 6632
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Little Wonder Phonograph Parts
Stephen,
Do you have any parts to this motor? Are the bad gears at least there, or are they missing completely? If you at least have an example I can probably help you.
Do you have any parts to this motor? Are the bad gears at least there, or are they missing completely? If you at least have an example I can probably help you.
-
tuberecuds
- Victor Jr
- Posts: 40
- Joined: Mon Jan 26, 2015 7:18 pm
Re: Little Wonder Phonograph Parts
I am certain I am missing two gears completely. If anyone out there who has one could be so kind as to supply a "Shop Drawing" I would make it worth his or her while.
Thanks to all
Stephen
Thanks to all
Stephen
-
JerryVan
- Victor Monarch Special
- Posts: 6632
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Little Wonder Phonograph Parts
Can you post a photo of what you've got? I have a Little Wonder and can make gears. I don't really want to disassemble mine but, if I knew what gears you need I could probably figure them out by looking at mine.
-
tuberecuds
- Victor Jr
- Posts: 40
- Joined: Mon Jan 26, 2015 7:18 pm
Re: Little Wonder Phonograph Parts
I also have the semi-rectangular plate that holds these 3 or so missing gears ( I do have the governor ). Thanks again, folks!
Stephen
Stephen
-
JerryVan
- Victor Monarch Special
- Posts: 6632
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: WANTED: Little Wonder Phonograph Parts
Well, there really isn't much to go on there...