WANTED: Tonearm /w cradle and support arm for Columbia AJ

Buy, sell, or trade your phonograph-related items here [except music]
Post Reply
phonolady
Victor I
Posts: 151
Joined: Mon Aug 26, 2013 2:21 pm

WANTED: Tonearm /w cradle and support arm for Columbia AJ

Post by phonolady »

I have a friend looking for the tonearm with horn cradle and the lower support arm for the small

Columbia phonograph model AJ.

JAS antiques that usually has these repro is out of stock currently.
Repo is fine, DOES ANYONE HAVE A SET EXTRA?

Thanks so much,
David & Lerria

Phonofreak
Victor VI
Posts: 3720
Joined: Tue Mar 23, 2010 7:00 pm
Location: Western, WA State

Re: WANTED: Tonearm /w cradle and support arm for Columbia

Post by Phonofreak »

There are 3 types of AJ. There is the top wind, second model with the fancy case, and the third model with the small case similar to the BH. All three have different arm set ups. Which one do you need?
Harvey Kravitz

phonolady
Victor I
Posts: 151
Joined: Mon Aug 26, 2013 2:21 pm

Re: WANTED: Tonearm /w cradle and support arm for Columbia

Post by phonolady »

Harvey,
Thanks for your reply, I knew there were 2 models, did not know about 3.

This model IS SIDE WIND, FANCY MOLDING AT THE BOTTOM AND DOES NOT LOOK LIKE AN AH.

From what you said that seems to be the 2nd model.

Thanks for your help,

David & Lerria

Phonofreak
Victor VI
Posts: 3720
Joined: Tue Mar 23, 2010 7:00 pm
Location: Western, WA State

Re: WANTED: Tonearm /w cradle and support arm for Columbia

Post by Phonofreak »

Yes, I know what you need. You can email me at [email protected]. I can reply with pictures of my second model AJ. Also, do you have the correct longthroat Analyzing reproducer? It has the 1886 markings on it. This was used from 1902-4. I have an extra one of these.
Harvey Kravitz

Post Reply