Interesting information on Red Gumwood used on some Edison cabinets.
http://www.craftsman-style.info/finishi ... umwood.htm
Red Gumwood
- briankeith
- Victor IV
- Posts: 1874
- Joined: Mon Jul 25, 2011 8:27 am
- Personal Text: Jeepster
- Location: Blairstown, New Jersey 07825
- Henry
- Victor V
- Posts: 2624
- Joined: Thu Jan 08, 2009 11:01 am
- Location: Allentown, Pennsylvania
Re: Red Gumwood
That is very informative, indeed. Sweet gum, Liquidambar styraciflua, is a handsome species. One finds it extensively planted along the eastern seaboard states, on lawns, in parks, and along streets. Its star-shaped (five-pointed) leaves turn lovely shades of yellow, orange, and red in fall. Here's more: https://www.arborday.org/trees/treeguid ... ItemID=928
-
Victrolacollector
- Victor V
- Posts: 2711
- Joined: Fri Nov 18, 2011 11:23 pm
- Location: NW Indiana VV-IV;
Re: Red Gumwood
Thank you for sharing this information, I have a Edison B-19 Chalet and it has a gumwood cabinet. I have always been under the impression that this was a negative aspect, gumwood was referred to as a cheap wood.
I am starting to think that even in todays world, that gumwood may have value.
I am starting to think that even in todays world, that gumwood may have value.
-
estott
- Victor Monarch
- Posts: 4176
- Joined: Wed Jan 07, 2009 4:23 pm
- Personal Text: I have good days...this might not be one of them
- Location: Albany NY
Re: Red Gumwood
Gumwood was once heavily promoted as a finished trim wood. It can be very attractive, but in my experience it can warp with age
-
Jerry B.
- Victor Monarch Special
- Posts: 8742
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Red Gumwood
Thank you, that was an interesting read. I had always assumed Gumwood was used in low end machines. Does anyone know if gum wood was used in making Victor O cabinets? Jerry B.
-
Edisone
- Victor IV
- Posts: 1140
- Joined: Sat Aug 01, 2009 5:17 pm
- Location: Can see Canada from Attic Window
Re: Red Gumwood
I work at a cemetery, and the old Superintendent's House, circa 1926, is entirely finished with beautiful gumwood. Baseboards, windows, doors, mantels, bookcases, and even kitchen cupboards - all very attractive after 89 years.
-
estott
- Victor Monarch
- Posts: 4176
- Joined: Wed Jan 07, 2009 4:23 pm
- Personal Text: I have good days...this might not be one of them
- Location: Albany NY
Re: Red Gumwood
The one I've seen was BirchJerry B. wrote:Thank you, that was an interesting read. I had always assumed Gumwood was used in low end machines. Does anyone know if gum wood was used in making Victor O cabinets? Jerry B.
-
Kirkwood
- Victor II
- Posts: 391
- Joined: Sat Jan 17, 2009 4:17 pm
Re: Red Gumwood
This was a very interesting and informative article, thanks for putting it up here.
The 1930 bungalow where I grew up, and where my Dad still lives, used very pretty gumwood trim in the downstairs rooms. (The upstairs was all yellow pine in a natural finish). Many of the houses nearby used it too, most were built post WW-I in the 20's and 30's. As a teenager, I was put to work helping my parents strip the old darkened "varnish" off every inch of trim in that house. We used a lacquer-type finish (Deft if I'm recalling it right) and it still looks quite good some 35-40 years later on. It's not a "typical" wood but has an attractive swirled grain to it.
The 1930 bungalow where I grew up, and where my Dad still lives, used very pretty gumwood trim in the downstairs rooms. (The upstairs was all yellow pine in a natural finish). Many of the houses nearby used it too, most were built post WW-I in the 20's and 30's. As a teenager, I was put to work helping my parents strip the old darkened "varnish" off every inch of trim in that house. We used a lacquer-type finish (Deft if I'm recalling it right) and it still looks quite good some 35-40 years later on. It's not a "typical" wood but has an attractive swirled grain to it.