Help Identifying this Crank

Discussions on Talking Machines & Accessories
Post Reply
Mickydoo
Victor I
Posts: 107
Joined: Mon Feb 29, 2016 3:02 pm

Help Identifying this Crank

Post by Mickydoo »

I have this crank and am trying to identify the correct machine that it goes to. I believe it is for one of the larger Edison Cylinder players, but not sure. Can anyone please help?

The shaft that goes into the machine is approximately 5 ¾" long, the tapered portion is 5" long, the wooden knob is 2" in length and the diameter of the threaded portion is approximately ½" (See Pics) Thanks for your help!
Attachments
IMG_5110.JPG
IMG_5130.JPG
Top
Jerry B.
Victor Monarch Special
Posts: 8743
Joined: Tue Feb 10, 2009 11:25 am
Personal Text: Stop for a visit when in Oregon.
Location: Albany, Oregon

Re: Help Identifying this Crank

Post by Jerry B. »

I don't believe it's an Edison crank. I'd guess it is from an off brand internal horn machine. Jerry Blais
Top
Victrola-nut
Victor O
Posts: 95
Joined: Mon Sep 08, 2014 2:40 pm

Re: Help Identifying this Crank

Post by Victrola-nut »

Thanks Jerry!
Top
Post Reply

Return to “Machines”