Misc. Parts for Sale

[ColoradoPhonograf]

I have been doing some cleaning in my work area making room for some of this years winter projects. I have the following parts available. I am open to offers on the various parts you may need to complete some of your projects.
I'm not looking at getting rich off of them but I do have to ask for fairly reasonable offers. You pay shipping to U.S locations only. I'll take care of the packing and boxing. Here's a brief overview as to what is available. Send me a private message as to what you are interested in, please include your email address and I'll contact you directly. Thanks, ColoradoPhonograf


Top left: Edison C-200 parts. Lock, id tag, metal trim pieces that wrap around the bottoms of the legs, crank escuteon, screws, etc.
Lower left: Victrola motor, not sure which model. Has the basic frame, spindle, spring barrels with attached gears, speed control rod and governor (1 gov. spring broken)

Center, from top to bottom:
Edison Diamond B reproducer. Sounds fine, stylus is good, nice nickel plating. One rim chip on the left side. Body is swollen and will require a small amount of filing to fit the carriage correctly.
Tiz-it swivel needs the neck resoldered onto the other piece.
Silvertone ?? adaptor to play vertical records .
Edison chip brush for cylinder machine
Busy Bee horn cradle. a little rusted and the pin that held this to the horn has been cut.

Right side: Various Victrola XI parts. May fit other models, but you'll have to make those decisions. Also a Victrola 4-3 id tag

Not pictured is a Columbia 11 ½" cast turntable (Grafonola style) with original felt. Nickel on outer edge is quite nice.


I have 2 Edison Home Model B bedplates. The one in the front has nice black paint and has moderate wear to the striping but is presentable. It has the endgate and carriage rod. The one behind it is in rougher condition and would need a repaint for sure. No rust, just paint wear. The rod at the front of the photo goes with the bedplate in the rear.


Various Edison Home model B parts. 2-4 minute gear selector switch, feedscrew with a couple of connecting pieces. winding shaft & dog, idler pulley and arm, carriage halfnut, motor frame spacer rods, etc.

What you see is what is for sale. That's all of it. Thanks for looking