I will slightly re-word what "Curt A" suggested. Use both hands to place thumbs on the small end of the mandrel, and fingers on the rim of the record. Then, rather than "pull", use your fingers to "squeeze" the record toward your thumbs. If you have strong enough fingers, the record should come off. The thing that I want to avoid is bending the mandrel shaft while wrestling with a stubborn cylinder. Using the method described will minimize that risk.BrianG23 wrote:Still have not been able to remove the cylinder- lord knows how long it has been on there.
As a last resort, I would even recommend removing the mandrel while attempting to remove the record. 1) Allow the machine to run all the down until there is no tension on the mandrel or crank. 2) Use a screwdriver to remove a set screw on the retaining ring at the end of the mandrel. 3) Slip off the mandrel. Now, you can be a lot more aggressive in removing the record from the mandrel.