Hi,
I know it's a long shot, but I'm looking for the small bottom trim block in the picture below. It's actually for a Vic C, but I think a E will work too. I know I can get one from Sitko, but I thought I might take a chance here first to see if anyone had a junker cabinet.
Thanks,
Bob
Wanted - Small Trim Block for Vic E - Original if possible
-
- Victor II
- Posts: 433
- Joined: Sat Mar 07, 2009 7:14 pm
-
- Victor Monarch Special
- Posts: 8716
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: Wanted - Small Trim Block for Vic E - Original if possib
What is the exact size? Jerry
-
- Victor IV
- Posts: 1387
- Joined: Mon Apr 26, 2010 3:13 pm
Re: Wanted - Small Trim Block for Vic E - Original if possib
Hi Bob- As Jerry said, post the size you need. I have a bottom block piece that is 13/16" square-- if it works, it's yours-- I hope to be down your way later in September, so will bring it when I come.
Brad
Brad
-
- Victor II
- Posts: 433
- Joined: Sat Mar 07, 2009 7:14 pm
Re: Wanted - Small Trim Block for Vic E - Original if possib
Thanks Jerry and Brad...I should have posted measurements.
The block is 1" wide, ½" tall, and ¼" thick. I guess anything bigger would work too.
thanks,
bob
The block is 1" wide, ½" tall, and ¼" thick. I guess anything bigger would work too.
thanks,
bob
-
- Victor II
- Posts: 284
- Joined: Sun May 10, 2015 10:35 pm
- Location: Stratford Ontario
Re: Wanted - Small Trim Block for Vic E - Original if possib
I have bought replacement wooden blocks and corner columns for a Victor E and Humpback II from Tim Fizer In Indiana. He does great work and is very helpful.
-
- Victor Jr
- Posts: 24
- Joined: Sun Oct 09, 2016 11:34 am
Re: Wanted - Small Trim Block for Vic E - Original if possib
I have a victor e junker cabinet. I could pull off a corner block if you still need one.
-
- Victor II
- Posts: 433
- Joined: Sat Mar 07, 2009 7:14 pm
Re: Wanted - Small Trim Block for Vic E - Original if possib
That's for the help. I found one that matches. Bob
-
- Victor II
- Posts: 433
- Joined: Sat Mar 07, 2009 7:14 pm
Re: Wanted - Small Trim Block for Vic E - Original if possib
Sorry...meant to say THANKS for the help !!