Whats wrong with this picture??

Post links to auctions and classifieds here
Forum rules
Post Reply
User avatar
TinfoilPhono
Victor V
Posts: 2014
Joined: Thu Jan 08, 2009 8:48 pm
Location: SF Bay Area, Calif.

Re: Whats wrong with this picture??

Post by TinfoilPhono »

A quick and simple fix. ;)
Top
miker2001
Victor II
Posts: 318
Joined: Sun Feb 09, 2014 10:01 pm
Location: Seattle, Washington

Re: Whats wrong with this picture??

Post by miker2001 »

The screw holding the U tube is usually flat and slotted. Is the arm from something like a VV-50?
Top
Jerry B.
Victor Monarch Special
Posts: 8716
Joined: Tue Feb 10, 2009 11:25 am
Personal Text: Stop for a visit when in Oregon.
Location: Albany, Oregon

Re: Whats wrong with this picture??

Post by Jerry B. »

Code: Select all

The screw holding the U tube is usually flat and slotted. Is the arm from something like a VV-50?
The VV-IV as well as other Victrolas were made for a long period of time. The first U tube screws were flat with a slot and then transitioned to the type show with this machine. This machine probably has the correct arm. A good check is to see that the needle comes very close or touches the spindle. If so, the arm is probably correct. Jerry B.
Top
Post Reply

Return to “ebay, Craiglist & Auction House Alerts”