WANTED: 33 stacker spindle for 1968 Dual 1019 record changer

[ehs004]

I know some collectors of older machines also still use their later turntables so i'm just giving this a shot!! Please send me a PM .
Thanks Eric

[Phono48]

Sorry, but I don't understand the request. Do you mean the standard tall spindle which is used when stacking all speeds of record, or the special 45rpm adaptor for playing 45 single with the large centre hole?

[gramophone-georg]

I know some collectors of older machines also still use their later turntables so i'm just giving this a shot!! Please send me a PM .
Thanks Eric

I think the 1019 uses the same model spindle as my 1009 if memory serves. I have three, but only one has been rebuilt with the tiny rubber pads that keep the whole stack from dropping at once. If you can replace those pads you can have one of my spare spindles once we verify it's correct. If not, let me try to find the eBay seller that sometimes sells the rebuilt ones.

[gramophone-georg]

ehs, here's one with new rubbers:

http://www.ebay.com/itm/DUAL-AW-2-Wechs ... SwSlBY0uza

If the fellow winds up not speaking English I'd be happy to do the deal as I can still speak enough German to get it done and then I can send to you. Us Dual 10 series people need to hang together!

[ehs004]

I know some collectors of older machines also still use their later turntables so i'm just giving this a shot!! Please send me a PM .
Thanks Eric

I think the 1019 uses the same model spindle as my 1009 if memory serves. I have three, but only one has been rebuilt with the tiny rubber pads that keep the whole stack from dropping at once. If you can replace those pads you can have one of my spare spindles once we verify it's correct. If not, let me try to find the eBay seller that sometimes sells the rebuilt ones.

Here are some pictures , i would like to find one tested and known to work , i saw a few on E Bay but i would rather trust someone o the Forum.

[ehs004]

G-G ,
Mine is definitely missing the rubber from the picture you posted ,it drops the whole stack but i'm not sure the brass tabs are in the shape they should be in they look bent and not centered with slots!

[ehs004]

Sorry, but I don't understand the request. Do you mean the standard tall spindle which is used when stacking all speeds of record, or the special 45rpm adaptor for playing 45 single with the large centre hole?

This particular turntable uses all 3, a 45 adapter with a integral shaft , then a separate spindle for stacking 33 or 78 rpm and a center spindle if you just want to play single lp's or 45s with a small centering disc the one your thinking about is more common where the 45 adapter slides on to the existing shaft Hi Fi's ect. Thanks !