Mid-range Sonora?

Discussions on Talking Machines & Accessories
Post Reply
thatonejohn
Victor I
Posts: 107
Joined: Sun Oct 19, 2014 1:21 am
Location: Minneapolis, MN

Mid-range Sonora?

Post by thatonejohn »

Picked up this Sonora at an antique shop over the weekend. Runs, but I have to figure out how to get the tone arm reattached. It doesn't have the giant gold plated motor like the deluxe models but the motor is still substantial and gold. Uncarved wooden tone arm, with both reproducers. Also, has the motor meter, but it only goes up to 9 10" records, or 6 12" records. Front door pulls out and then slides underneath.

So, is this a period model? I didn't see it in Wakeman's Sonora book. The Colonial is close, but I think this is smaller. There's a number under the accessory drawer, 26.

It'll be a while before I can put any serious time into this machine, but it should be a good machine at a reasonable size.
Attachments
IMG_20170708_152522.jpg
IMG_20170708_152603.jpg
IMG_20170708_152600.jpg
IMG_20170710_194402.jpg
IMG_20170710_193939.jpg

Jerry B.
Victor Monarch Special
Posts: 8757
Joined: Tue Feb 10, 2009 11:25 am
Personal Text: Stop for a visit when in Oregon.
Location: Albany, Oregon

Re: Mid-range Sonora?

Post by Jerry B. »

Until you sort out the tone arm you should remove the spring motor. You could get your daily exercise lifting that sucker over your head ten times in a row a couple of times a day. ;)

Jerry Blais

User avatar
Silvertone
Victor II
Posts: 267
Joined: Mon Jan 12, 2009 3:57 pm

Re: Mid-range Sonora?

Post by Silvertone »

So, is this a period model?
Yes, this is one of Sonora's Period models. It is the Colonial Deluxe style and called the Mt. Vernon. It sold for $325 when new.

thatonejohn
Victor I
Posts: 107
Joined: Sun Oct 19, 2014 1:21 am
Location: Minneapolis, MN

Re: Mid-range Sonora?

Post by thatonejohn »

Silvertone wrote:
So, is this a period model?
Yes, this is one of Sonora's Period models. It is the Colonial Deluxe style and called the Mt. Vernon. It sold for $325 when new.
Ah, so there must have been some artistic interpretation involved with the images in the catalog. There's no way the lower knobs would slide into the door storage spot.
Attachments
2017-07-11_1727.png
2017-07-11_1727.png (111.65 KiB) Viewed 1902 times

User avatar
phonogfp
Victor Monarch Special
Posts: 8250
Joined: Wed Jan 07, 2009 5:08 pm
Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
Location: New York's Finger Lakes

Re: Mid-range Sonora?

Post by phonogfp »

Sonora was notorious for making slight changes to its cabinets seemingly year by year. I have a Sonora which corresponds exactly to the 1924 catalog illustration of the model, but the 1922 catalog illustration shows entirely different legs.

George P.

emerson
Victor III
Posts: 749
Joined: Mon Jan 12, 2015 7:41 pm

Re: Mid-range Sonora?

Post by emerson »

Nice find of a really nice machine---you have a good one there.

User avatar
AmberolaAndy
Victor V
Posts: 2744
Joined: Fri May 26, 2017 10:15 pm
Location: A small town near Omaha, Nebraska

Re: Mid-range Sonora?

Post by AmberolaAndy »

Sonoras were some of the nicest looking machines of that time period IMO. Great find!

User avatar
Swing Band Heaven
Victor III
Posts: 554
Joined: Thu Jul 22, 2010 2:16 pm

Re: Mid-range Sonora?

Post by Swing Band Heaven »

It is probably a stupid question but what does the dial with 10" and 12" on it show?

Nice machine by the way.

Jerry B.
Victor Monarch Special
Posts: 8757
Joined: Tue Feb 10, 2009 11:25 am
Personal Text: Stop for a visit when in Oregon.
Location: Albany, Oregon

Re: Mid-range Sonora?

Post by Jerry B. »

It is probably a stupid question but what does the dial with 10" and 12" on it show?
Good question. It's an indicator to let the operator know how far the spring motor is wound. By looking at the indicator you can estimate how many 10" or 12" records the machine will play before additional winding. It was a feature on the better Sonora machines.

Jerry B.

Jerry B.
Victor Monarch Special
Posts: 8757
Joined: Tue Feb 10, 2009 11:25 am
Personal Text: Stop for a visit when in Oregon.
Location: Albany, Oregon

Re: Mid-range Sonora?

Post by Jerry B. »

It is probably a stupid question but what does the dial with 10" and 12" on it show?
Good question. It's an indicator to let the operator know how far the spring motor is wound. By looking at the indicator you can estimate how many 10" or 12" records the machine will play before additional winding. It was a feature on the better Sonora machines.

Jerry B.

Post Reply