Does anyone know if there is a safe way to flatten laminated disks?
S-B-H
Straigtening warped 78s
- Swing Band Heaven
- Victor III
- Posts: 554
- Joined: Thu Jul 22, 2010 2:16 pm
- phonogfp
- Victor Monarch Special
- Posts: 7458
- Joined: Wed Jan 07, 2009 5:08 pm
- Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
- Location: New York's Finger Lakes
Re: Straigtening warped 78s
If a laminated record such as Columbia were put between the glass plates, put into the oven at room temperature, then brought up to 175 degrees, I don't understand why it would be any more at risk than a solid disc.
Please educate me, as I wouldn't have hesitated to do this with a laminated disc.
George P.
Please educate me, as I wouldn't have hesitated to do this with a laminated disc.
George P.
-
- Victor IV
- Posts: 1862
- Joined: Sun Mar 15, 2009 6:18 am
- Location: Luxembourg
Re: Straigtening warped 78s
The only fragility I see in laminated records is the difference in thermal expansion between the layers (paper and shellac). This creates tension between the layers and may create wrinkles and superficial cracks. The difference in moisture absorption between these layers also creates such stresses, but some experimentation would be required to figure out which of them is the most important environmental factor.phonogfp wrote:If a laminated record such as Columbia were put between the glass plates, put into the oven at room temperature, then brought up to 175 degrees, I don't understand why it would be any more at risk than a solid disc.
Please educate me, as I wouldn't have hesitated to do this with a laminated disc.
George P.
- phonogfp
- Victor Monarch Special
- Posts: 7458
- Joined: Wed Jan 07, 2009 5:08 pm
- Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
- Location: New York's Finger Lakes
Re: Straigtening warped 78s
Agreed, but bringing the temperature up gradually (starting with a cool oven) should minimize any expansion differential, shouldn't it?CarlosV wrote: The only fragility I see in laminated records is the difference in thermal expansion between the layers (paper and shellac). This creates tension between the layers and may create wrinkles and superficial cracks. The difference in moisture absorption between these layers also creates such stresses, but some experimentation would be required to figure out which of them is the most important environmental factor.
I'll need to dig out a junk Columbia and try this.
George P.