HMV His Masters Voice HMV 34 motor from HMV 193/194 203/204

[soundgen]

HMV His Masters Voice HMV 34 motor from HMV 193/194 203/204 cabinets etc RARE

“As found motor clicks when wound so has 1 broken spring and needs cleaning and overhauling , see pictures”

https://www.ebay.co.uk/itm/233514657915

[gramophone-georg]

Say, is that shorter 8" arm you have up acceptable for an HMV No. 32 machine?

[slippery]

Does this have the longer spindle required for the thicker seatboards on the big re-entrants?

[soundgen]

Say, is that shorter 8" arm you have up acceptable for an HMV No. 32 machine?

possibly I'll have to try and find out

[soundgen]

Does this have the longer spindle required for the thicker seatboards on the big re-entrants?

Not sure I'll measure it , didn't really think about that do you know what the difference is ?

[slippery]

The correct spindle for a 202/203 should protrude 48mm above the frame casting, on the majority of 34 motors it will be around 44mm...apart from the spindle everything else is the same. (I'm not sure about on the 193/194's though)