Never seen this Kimball Floor Model Before...
-
- Victor III
- Posts: 742
- Joined: Mon Jan 12, 2015 7:41 pm
Re: Never seen this Kimball Floor Model Before...
So, out of curiousity----Do you have the largest Kimball collection in the neighborhood?
-
- Victor Jr
- Posts: 3
- Joined: Fri Aug 14, 2020 12:00 pm
- Personal Text: Offbrands are the most interesting
Re: Never seen this Kimball Floor Model Before...
Hi all,
Thanks for your suggestions on the reproducers. Jerry I think your correct in that the diaphragm was replaced. The seller had mentioned something about wanting to/ having replaced the aluminum diaphragm with a mica diaphragm, but unfortunately I didn't hear him clearly.I did open the reproducer and while the gaskets appear new one of them is broken so it will need to get replaced sometime soon. I was able to (mostly) remedy the buzzing problem by applying some bees wax to the needle bar- diaphragm junction (there was none previously again pointing to a replaced diaphragm).
In response to having the largest Kimball collection, unless you know somebody in central PA with two Kimballs I would go with yes. Haha. In all honestly, I knew nothing of the brand before I saw this machine for sale. I would like to see other examples of their machines because they seem both well build and designed.
David I got a video of 'er playing for you. Unfortunately I don't have a proper external microphone available so the audio was recorded through my phone's microphone. She does sound really good, and hopefully that will come across in to some extant in the video. Also forgive my use of vertical video. Here is the link: https://www.youtube.com/watch?v=MnIueOkWJPA
Thanks for your suggestions on the reproducers. Jerry I think your correct in that the diaphragm was replaced. The seller had mentioned something about wanting to/ having replaced the aluminum diaphragm with a mica diaphragm, but unfortunately I didn't hear him clearly.I did open the reproducer and while the gaskets appear new one of them is broken so it will need to get replaced sometime soon. I was able to (mostly) remedy the buzzing problem by applying some bees wax to the needle bar- diaphragm junction (there was none previously again pointing to a replaced diaphragm).
In response to having the largest Kimball collection, unless you know somebody in central PA with two Kimballs I would go with yes. Haha. In all honestly, I knew nothing of the brand before I saw this machine for sale. I would like to see other examples of their machines because they seem both well build and designed.
David I got a video of 'er playing for you. Unfortunately I don't have a proper external microphone available so the audio was recorded through my phone's microphone. She does sound really good, and hopefully that will come across in to some extant in the video. Also forgive my use of vertical video. Here is the link: https://www.youtube.com/watch?v=MnIueOkWJPA
- barnettrp21122
- Victor IV
- Posts: 1610
- Joined: Thu Jan 08, 2009 4:19 pm
- Personal Text: "Did you ever stop to think that pleasure is a duty?" (Victor sales pamphlet)
Re: Never seen this Kimball Floor Model Before...
Sounds good me! I really like the looks of it too! Thanks for posting.
Bob
Bob
"Comparison is the thief of joy" Theodore Roosevelt
His Master's Voice Automatic 1A Exponential Gramophone Demonstration:
https://www.youtube.com/watch?v=Qi70G1Rzqpo
His Master's Voice Automatic 1A Exponential Gramophone Demonstration:
https://www.youtube.com/watch?v=Qi70G1Rzqpo
-
- Victor V
- Posts: 2403
- Joined: Sat Jul 09, 2016 7:12 pm
Re: Never seen this Kimball Floor Model Before...
Many thanks for posting a photo of the horn. It seems very well designed. I also think that it sounds pretty good, as it is now, but you'd likely get more of a bass response, and a stronger mid-rage, if an aluminum diaphragm was installed in place of the mica--which I agree, was most likely a replacement.
OrthoFan
OrthoFan
-
- Victor Jr
- Posts: 3
- Joined: Fri Aug 14, 2020 12:00 pm
- Personal Text: Offbrands are the most interesting
Re: Never seen this Kimball Floor Model Before...
I do think I want to return it to it’s original state and put an aluminum diaphragm back in sometime soon. Do you, or anyone else, have a site you would recommend where I can source one?
- dzavracky
- Victor IV
- Posts: 1602
- Joined: Fri Oct 25, 2019 11:37 pm
- Location: Washington DC
Re: Never seen this Kimball Floor Model Before...
Sounds lovely!! I certainly would’ve picked it up if it were closer to me.
Thanks a lot for the video! Maybe Wyatt Markus can help with the diaphragm?
David

Thanks a lot for the video! Maybe Wyatt Markus can help with the diaphragm?
David