Wanted: victor 6 parts

[Josh_boro20]

Hello, I am looking for a gold slotted crank for my victor 6 as well as a gold crank Escutcheon and gold horn elbow. I will need a speed control arm and guide also.
Please message me with availability.
-Joshua

[drboruff]

Joshua,
Below is a link to the crank escutcheon you need for your Victor 6.
Thanks,
David

https://www.ebay.com/itm/266033673605

[mattrx]

I have this for $15 plus regular shipping cost. I have the screws too. Pm me with interest.

Matt

[Josh_boro20]

I have this for $15 plus regular shipping cost. I have the screws too. Pm me with interest.

Matt

I will take it, pm sent

[Jerry B.]

Finding a gold slotted crank will be really difficult. I'd suggest finding a skinny Victrola crank with the same distance from the mahogany wood knob to the turn. The crank will be too long so take it to a machinist and have it cut to the correct length, drilled to the correct depth, and cut a slot. Finally, have it plated when you plate the elbow. Plating will be expensive to wait until you have all the needed parts before plating.

Great find!
Jerry B.

[JerryVan]

I believe Ron Sitko, (RIP), used to carry the gold cranks and gold horn elbows. They were bright plated, which in this case would be a good match. Now, it's just a question as to whether or not the current proprietors of Ron's business have any stock in these items.

[mattrx]

I believe Ron Sitko, (RIP), used to carry the gold cranks and gold horn elbows. They were bright plated, which in this case would be a good match. Now, it's just a question as to whether or not the current proprietors of Ron's business have any stock in these items.

Here is their web address, in case you need it. https://thephonographshop.com/

[JerryVan]

The crank... https://thephonographshop.com/products/ ... ed-9097bgp

The horn elbow... https://thephonographshop.com/products/ ... old-plated