WANTED: Key for Double Salter Lock
-
gstone
- Victor O
- Posts: 76
- Joined: Tue Oct 16, 2018 1:58 pm
- Personal Text: Redson68
WANTED: Key for Double Salter Lock
Just restored this oak double Salter cylinder cabinet, looking for a key that will operate the locks. Attached is a pick of a key that sort of works but is certainly not a period key or correct. Thanks in advance for any help! GSS
- Phono-Phan
- Victor V
- Posts: 2863
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: WANTED: Key for Double Salter Lock
I have had pretty good luck with an antique dealer near me. He has a box of cabinet keys. He lets me take the box home and try the keys to see which one works on my record cabinets. I just return the box and pay for what I used. Maybe ask around with antique dealers in your area to see if they have a supply of cabinet keys.
-
collector52
- Victor Jr
- Posts: 14
- Joined: Thu Apr 09, 2020 12:12 pm
Re: WANTED: Key for Double Salter Lock
Good Morning-
Here are a few pictures of the key that came with my Salter when I acquired it many years ago. To be honest, I am not sure it is the original key but it locks and unlocks the cabinet when needed. I have to wiggle it slightly to get it in position in the keyway but once seated it rotates the lock 360 degrees with no issues. I forgot to take a picture of the end of the key but it is what I believe is referred to as a barrel key as the shank is a hollow tube.
I hope this helps. Good Luck!
Chris
Here are a few pictures of the key that came with my Salter when I acquired it many years ago. To be honest, I am not sure it is the original key but it locks and unlocks the cabinet when needed. I have to wiggle it slightly to get it in position in the keyway but once seated it rotates the lock 360 degrees with no issues. I forgot to take a picture of the end of the key but it is what I believe is referred to as a barrel key as the shank is a hollow tube.
I hope this helps. Good Luck!
Chris
- Attachments
-
- IMG_2357.jpg (184.34 KiB) Viewed 447 times
-
- IMG_2356.jpg (181.92 KiB) Viewed 447 times
-
gstone
- Victor O
- Posts: 76
- Joined: Tue Oct 16, 2018 1:58 pm
- Personal Text: Redson68
Re: WANTED: Key for Double Salter Lock
Thanks for the feedback guys!
GSS
GSS
- ChesterCheetah18
- Victor II
- Posts: 453
- Joined: Mon Jun 22, 2020 7:16 pm
Re: WANTED: Key for Double Salter Lock
I have a very similar key. Shank OD is 0.17". ID is 0.12". Shoot me a PM if you're interested.
Steve
Steve