Hello everyone - picked up a C250 today, but can't get the record storage door to open. It came with a key (not original) that seems to fit - you can turn and hear the mechanism moving/click - but the door still won't open. Maybe the latch is busted?
Wondering if anyone has encountered this and could offer some advice on getting it open - don't want to try prying it open and damaging the cabinet.
Thanks!
Unable to open door on Edison C250
- phonogfp
- Victor Monarch Special
- Posts: 8087
- Joined: Wed Jan 07, 2009 5:08 pm
- Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
- Location: New York's Finger Lakes
Re: Unable to open door on Edison C250
Good for you for not impatiently taking a screwdriver to it!
If the machine has been stored in a damp environment, the door may well be swelled. If that's the situation, just let it dry out in your house. I have an oak VV-XVI which was swollen to the point that the record doors overlapped - - it took several months, but eventually they returned to their normal dimensions.
Good luck!
George P.
If the machine has been stored in a damp environment, the door may well be swelled. If that's the situation, just let it dry out in your house. I have an oak VV-XVI which was swollen to the point that the record doors overlapped - - it took several months, but eventually they returned to their normal dimensions.
Good luck!
George P.
-
- Victor Monarch Special
- Posts: 6592
- Joined: Mon Aug 24, 2009 3:08 pm
- Location: Southeast MI
Re: Unable to open door on Edison C250
The door on my B250 sometimes sticks. While pulling on the door, have someone grab to top of the cabinet, (not the lid), and give the case a twist to the right & left. Cabinet joints sometimes loosen and allow the cabinet to go out-of-square, or lean, thereby pinching the door. A telltale sign of this, aside from sticking, is seen when carefully examining the gap between the door and door opening. A tapering gap signifies a cabinet that has sagged due to loose joints.
- Governor Flyball
- Victor II
- Posts: 311
- Joined: Thu Nov 26, 2015 8:59 pm
- Location: Waterloo, Ontario, Canada
Re: Unable to open door on Edison C250
I had the same with my c250. If you have the correct key and hear the click, the door may have swollen as mentioned.
I unscrewed the escutcheon plate on mine to better examine if the slide bolt actually slid back. The latch is simple and the key end lobe may be not long enough to pull the latch cka far enough.
Can you peer in the the door crack where the latch is and see if the key fully retracted the bolt?
I unscrewed the escutcheon plate on mine to better examine if the slide bolt actually slid back. The latch is simple and the key end lobe may be not long enough to pull the latch cka far enough.
Can you peer in the the door crack where the latch is and see if the key fully retracted the bolt?
-
- Victor Jr
- Posts: 11
- Joined: Sun Aug 29, 2021 4:26 pm
Re: Unable to open door on Edison C250
Hi everyone - appreciate the responses! Took another look and don't think the door is swollen because it moves freely when trying to open - it's just the latch that prevents it from opening. Guess it could be a key issue - looking around for a key and they're pricey - but maybe there's treasure behind the door so the key purchase will be worth it! Will post back if a solution is found.
- Phono-Phan
- Victor V
- Posts: 2812
- Joined: Fri Apr 06, 2012 9:38 pm
- Location: Plover, WI
Re: Unable to open door on Edison C250
Where are you located? Maybe someone with a key can come try to open it if indeed it is locked. I have had some of the little spring ball door latches stick also. I have used a thin putty knife to help push in the little ball.
-
- Victor Jr
- Posts: 11
- Joined: Sun Aug 29, 2021 4:26 pm
Re: Unable to open door on Edison C250
That's a great suggestion - live out in the country - outside of Brush, Colorado - so probably unlikely - but one never knows!
Thanks for the idea.
Thanks for the idea.
- fmblizz
- Victor IV
- Posts: 1204
- Joined: Tue Jan 12, 2010 4:59 pm
- Location: South Jersey
Re: Unable to open door on Edison C250
Possibly someone could loan you a key so you can at least open the cabinet and then possibly find have one fabricated or better yet find something that matches.
Good luck.
blizz
Good luck.
blizz