LOCATED: Victor 10-50 magazine bolts

[MarkELynch]

I’m looking for a hardware set to mount the magazine base in a Victor 10-50 or 9-55.

Would appreciate any leads. A now unusual thread #14-24. (Yes, #14 in the special series)
I’d like to find original bolts rather than modify the threads in the record guide.
Oval black enamel head, slotted.

Thanks!
Mark

[Phono-Phan]

McMaster-Carr sells some pretty scarce hardware. Not sure if they have #14 size bolts though. Check them out.

[MarkELynch]

Thanks, yes, McMaster and Blacksmith Bolt are good sources for hardware but no dice this time.
eBay sometimes has NOS obsolete fasteners but what is available now in #14 is either too short or has the wrong type of head.

Hopefully some original hardware will show up.

Mark

[MarkELynch]

Thanks to Barry for supplying three of the missing bolts!
I can install the magazine base back in the 9-55 while I look for the wayward bolt.

Mark