Located: Electrola Knob

[MarkELynch]

I’m searching for a single knob for a 9-55 restoration, it controls the Electrola volume and is also use in the Radiola 28 panel.
It uses two set screws to attach it to the shaft.
I also need a pair of the gold wood screws that attach the escutcheon to the front of the radio panel.

Photos are below as well as the Victor parts listing for the two parts. The “where used” column is at the right in case you have an junker donor machine. Obviously only the machines in production at the time of printing are listed. The 8-60, 9-55 and 9-25 would also be included.

Thanks for your help.
Mark

[Curt A]

Brass wood screws #4 x ⅜ - just polish the heads and they're gold
https://www.ebay.com/itm/226045765354?c ... ENEALw_wcB

[MarkELynch]

Curt, thanks for the suggestion.

I have a good stock of the ones in the link you sent. I located some original ones today.

Mark