Wanted…..One piece Victor support arm for a 34 inch horn

[Kevin Clark]

Starting the hunt for an Extra long, one piece support arm for a Victor FM machine. Have only seen a few of these over the years. Used to support a 34 inch horn like the aluminum horn John Duffy had listed. Would consider purchasing a complete machine with this setup but really just need the support arm and horn.

[Phono-Phan]

Here is one on my pre-dog MS. It has the aluminum horn(no hanger loop) and a nickle elbow. It has to be aluminum horn because of the weight. I have a similar all brass horn that is way to heavy. This is the only aluminum horn I have seen in over 40 years of collecting other than the one John Duffy is offering. VERY RARE!!!!!The other MS has the added bracket and brass bell horn.

[Kevin Clark]

Have an original travel arm. John has the horn, but unless I have the support arm cannot put it together. Tempting to get the horn while one is available. Probably would be one or the other, have the horn but no support arm or have the support arm and no horn. Thanks for the photos. Was looking to setup on an MS as well.