Sonora Supreme/Invincible

Discussions on Talking Machines & Accessories
Post Reply
Zenger
Victor II
Posts: 241
Joined: Mon Apr 22, 2019 7:50 pm

Sonora Supreme/Invincible

Post by Zenger »

Greetings, everyone. I'm restoring a Sonora Invincible, and I'm missing one of the three needle cups. The problem is, I don't know what it should look like. I know it should be gold-plated, and I know what the other two needle cups look like (see picture), but the one I'm missing, which I believe is for used needles, would probably have a lid (the other two don't), and would probably be shaped differently, since the two outer needle cups take a screw through the bottom but the center one doesn't. At least, there's no hole through that part of the needle cup holder. (I've attached a picture of that, too.) If someone has an Invincible or a Supreme with the original needle cups (I believe both models used the same ones) and could post pictures of the center needle cup from the top and side, so I can know what I should be looking for, I would very much appreciate it. Thank you!
Attachments
Sonora Invincible needle cup.jpg
Sonora Invincible needle cup rack.jpg

Pathe Logical
Victor II
Posts: 435
Joined: Sun Jul 21, 2013 7:50 pm

Re: Sonora Supreme/Invincible

Post by Pathe Logical »

Hope these pics help!
Attachments
PXL_20251024_003933993.jpg
PXL_20251024_004011434.jpg
PXL_20251024_004344579.jpg

Zenger
Victor II
Posts: 241
Joined: Mon Apr 22, 2019 7:50 pm

Re: Sonora Supreme/Invincible

Post by Zenger »

Very helpful! Thank you! Would you mind if I used them to post in the Yankee Trader and on Facebook?

Pathe Logical
Victor II
Posts: 435
Joined: Sun Jul 21, 2013 7:50 pm

Re: Sonora Supreme/Invincible

Post by Pathe Logical »

You are most welcome! Feel free to use them however you want.

Post Reply