I've always wanted one of these machines since seeing them on the 1930s/40s HMV covers. (I didn't see the covers back then, of course!) But was wondering if this one has the correct motor? I'm not sure what the handle sticking out of the top is for? Have never seen that on one of the illustrations. I love these magnetic pickups (have the same one in my HMV radiogram).
eBay Item #180693014592
Regards, Glenn.
Is this the correct motor?
- recordo
- Victor II
- Posts: 302
- Joined: Tue Aug 17, 2010 8:04 am
- Personal Text: "Allow instrument to run whilst winding"
- Location: Australia
-
- Victor VI
- Posts: 3463
- Joined: Wed Jan 07, 2009 3:21 pm
Re: Is this the correct motor?
The good news is that this HMV 122 is completely original.
The bad news is that you'll be bidding against me to get it
The bad news is that you'll be bidding against me to get it

- recordo
- Victor II
- Posts: 302
- Joined: Tue Aug 17, 2010 8:04 am
- Personal Text: "Allow instrument to run whilst winding"
- Location: Australia
Re: Is this the correct motor?
Shane,
I never get into bidding wars with friends, so it's all yours mate!
Regards, Glenn.
(what's the handle for on the top?)
I never get into bidding wars with friends, so it's all yours mate!
Regards, Glenn.
(what's the handle for on the top?)
- Lucius1958
- Victor Monarch
- Posts: 4066
- Joined: Tue Dec 14, 2010 12:17 am
- Location: Where there's "hamburger ALL OVER the highway"...
Re: Is this the correct motor?
Judging that there doesn't seem to be a separate power cord (only the plug for the radio), I'd guess it was a crank for a spring motor.recordo wrote:
(what's the handle for on the top?)
Bill
- recordo
- Victor II
- Posts: 302
- Joined: Tue Aug 17, 2010 8:04 am
- Personal Text: "Allow instrument to run whilst winding"
- Location: Australia
Re: Is this the correct motor?
Yes but there's a hole for the crank on the side.
-
- Victor V
- Posts: 2439
- Joined: Sat Jul 09, 2016 7:12 pm
Re: Is this the correct motor?
Hi Glen:
You mean that hole near the turntable with what looks to be the crank sticking out of it?
From what I see, it's a hole near the turntable with the crank sticking out of it....
You'll notice it's held in place with a clip in this photo:

Seems, for whatever reason, they included a crank storage hole, so the crank could be removed from the side, and stored on the top, as was the case with many portables. I agree, it's kind of odd, considering it's not really a portable. (Maybe the mfg. used the same motor-board for a different style model that had a conventional lid and carrying handle?)
You mean that hole near the turntable with what looks to be the crank sticking out of it?
From what I see, it's a hole near the turntable with the crank sticking out of it....

You'll notice it's held in place with a clip in this photo:

Seems, for whatever reason, they included a crank storage hole, so the crank could be removed from the side, and stored on the top, as was the case with many portables. I agree, it's kind of odd, considering it's not really a portable. (Maybe the mfg. used the same motor-board for a different style model that had a conventional lid and carrying handle?)
- recordo
- Victor II
- Posts: 302
- Joined: Tue Aug 17, 2010 8:04 am
- Personal Text: "Allow instrument to run whilst winding"
- Location: Australia
Re: Is this the correct motor?
Thanks OF. I never even noticed the clip.
Have only ever come across two of these in my time. I think they're cute.
here's the cover I was talking about in my first post.
regards, Glenn.
Have only ever come across two of these in my time. I think they're cute.
here's the cover I was talking about in my first post.
regards, Glenn.
- Attachments
-
- HMV-Cover.jpg (56.78 KiB) Viewed 1670 times
- Skihawx
- Victor IV
- Posts: 1027
- Joined: Fri Aug 20, 2010 7:48 am
- Location: New Hampshire
Re: Is this the correct motor?
Wow $448.00!! Didn't think it was worth that much.
Looks kind of small for that kind of money!
Any one here the lucky winner?
Looks kind of small for that kind of money!

Any one here the lucky winner?
-
- Victor VI
- Posts: 3463
- Joined: Wed Jan 07, 2009 3:21 pm
Re: Is this the correct motor?
The lucky winner would be me
It was hovering around $300 until the last couple minutes. Good thing I put in a $600 bid 60 secs before it closed because it jumped to my winning bid about 20 secs before it ended.
I probably paid a little too much, but I was determined to get it.
The spring motored version is actually quite rare now days, mainly because back in the 70s & 80s they were a popular choice out here, to be converted to crapophones. They used to mount a tonearm where the needle cup is, and a repro Edison 8 panel horn was mounted in place of the pick-up & conduit connected the two under the motor board.
The electric motored version was of no interest to collectors, so they are far more common now, & usually sell for around $100-$200.
The all electric model was available as an HMV or Columbia, & both seem to turn up on UK Ebay quite frequently, but I've never seen a spring motor machine offered in England.
Mine was made in Sydney, so perhaps a spring motor 122 was never offered in England??

It was hovering around $300 until the last couple minutes. Good thing I put in a $600 bid 60 secs before it closed because it jumped to my winning bid about 20 secs before it ended.
I probably paid a little too much, but I was determined to get it.
The spring motored version is actually quite rare now days, mainly because back in the 70s & 80s they were a popular choice out here, to be converted to crapophones. They used to mount a tonearm where the needle cup is, and a repro Edison 8 panel horn was mounted in place of the pick-up & conduit connected the two under the motor board.
The electric motored version was of no interest to collectors, so they are far more common now, & usually sell for around $100-$200.
The all electric model was available as an HMV or Columbia, & both seem to turn up on UK Ebay quite frequently, but I've never seen a spring motor machine offered in England.
Mine was made in Sydney, so perhaps a spring motor 122 was never offered in England??
-
- Victor VI
- Posts: 3463
- Joined: Wed Jan 07, 2009 3:21 pm
Re: Is this the correct motor?
I've always wondered about that myself, but the seller answered that question without me even asking.Ortho_Fan wrote:
Seems, for whatever reason, they included a crank storage hole, so the crank could be removed from the side, and stored on the top, as was the case with many portables. I agree, it's kind of odd, considering it's not really a portable. (Maybe the mfg. used the same motor-board for a different style model that had a conventional lid and carrying handle?)
He has a second machine which he sent me a picture of, which I've posted below.
Now it all makes sense

I didn't even know such a thing existed!
I've never seen any reference to a lid being available, and I've never seen one here or in England, so perhaps they are an Aussie only optional extra? Obviously it would fit the electric machine as well.
When I first saw it,I thought it may have been innovative home made dust cover, but clearly the crank storage was originally designed/provided with these lids in mind.
I'd imagine these lids/covers are a very rare item that didn't sell very well from the start, and the survival rate of those that did sell must be extremely low.
No doubt most people were far happier to leave the retailers with the machine in a cardboard box, and to spend the extra cash on records.