Looks like you need to do some careful sifting of your floor sweepings?
Still waiting for my digital microscope.Soon.
black wax cylinder damage
-
- Victor O
- Posts: 70
- Joined: Tue Dec 11, 2012 2:47 am
- kirtley2012
- Victor IV
- Posts: 1607
- Joined: Sat Feb 11, 2012 3:10 pm
- Personal Text: Buyer of broken things
- Location: North Shields, UK
- Contact:
Re: black wax cylinder damage
too late, i recently moved house!, i checked it constantly when i was there and i didnt find anything, it must have gone under the kitchen units or have been swept away, it was damaging my records so i needed a new one anyways!
-
- Victor II
- Posts: 275
- Joined: Sun Jan 27, 2013 4:06 pm
- Location: Guisborough Yorks
Re: black wax cylinder damage
If you are still having problems with your stylus, Email me and I will sent you the address of an excellent contact in Devon who will replace or supply you with anything you need. He also makes superb reproductions of any reproducer.
Regards,
Alistair.
Regards,
Alistair.
-
- Victor O
- Posts: 70
- Joined: Tue Dec 11, 2012 2:47 am
Re: black wax cylinder damage
For Kirtley:
Well I finally got my digital microscope for $22 US.
And wow I am pleased with it.
Enclosed are photos of an Amberol record strip.
A recorder stylus.
And my "C" type Reproducer stylus .Clean and dirty.
Well I finally got my digital microscope for $22 US.
And wow I am pleased with it.
Enclosed are photos of an Amberol record strip.
A recorder stylus.
And my "C" type Reproducer stylus .Clean and dirty.
- Attachments
-
- cleaned_C_ sylus.jpg (63.18 KiB) Viewed 1152 times
-
- typical stylus before cleaning-c.jpg (79.35 KiB) Viewed 1152 times
-
- strip from blue amberol record.jpg (71.8 KiB) Viewed 1152 times
-
- recorder stylus
- recorder stylus.jpg (67.38 KiB) Viewed 1152 times
-
- Victor O
- Posts: 70
- Joined: Tue Dec 11, 2012 2:47 am
Re: black wax cylinder damage
I want to rotate my Recorder stylus.Can you tell me Kirtley how
your supposed to do it? Do I heat it with a soldering iron to
soften the shellac then rotate it?
your supposed to do it? Do I heat it with a soldering iron to
soften the shellac then rotate it?