I am trying to find any type of schematic for the a 1920's Brunswick Balke Model T phonograph. need to fix the spring and want to make sure parts go back to where they belong. and any info on where to get parts.
Love this machine
Thanks for the helps
schematics for Bunswick balke Model T
-
- Victor Jr
- Posts: 6
- Joined: Sat Sep 28, 2013 6:28 pm
- alang
- VTLA
- Posts: 3116
- Joined: Thu Aug 19, 2010 9:36 am
- Personal Text: TMF Moderator
- Location: Delaware
Re: schematics for Bunswick balke Model T
That's what we would all love to have, but unfortunately few if any such schematics exist or can be found today. I suggest taking lots of pictures from all angles at different stages during dis-assembly, that way you have a reference where everything belongs in your specific machine and motor.
Good luck
Andreas
Good luck
Andreas
- VintageTechnologies
- Victor IV
- Posts: 1651
- Joined: Thu Jul 14, 2011 12:09 pm
Re: schematics for Bunswick balke Model T
Welcome to this forum. When you discover the lack of documentation for a particular machine, then I suggest that you go ahead and document your adventure with photos along the way, and a description of the procedure. Then upload on this forum to share your hard-won knowledge . That is what many of us have done. In my case, repairing springs, governor and other bits in an Edison Opera phonograph.
If you need springs and other parts, Ron Sitco 518-371-8549 is a good person to start with.
If you need springs and other parts, Ron Sitco 518-371-8549 is a good person to start with.
-
- Victor Jr
- Posts: 6
- Joined: Sat Sep 28, 2013 6:28 pm
Re: schematics for Bunswick balke Model T
will do thanks
-
- Victor IV
- Posts: 1269
- Joined: Sun Oct 25, 2009 12:53 pm
- Location: Michiana
Re: schematics for Bunswick balke Model T
The Model T (known in the Brunswick literature as the "Hampton") uses the Type B four-spring motor. I believe that I've seen the repair data somewhere on the Web, but cannot remember just were.
- marcapra
- Victor V
- Posts: 2180
- Joined: Thu Jun 28, 2012 12:29 am
- Personal Text: Man who ride on tiger find it very difficult to dismount! Charlie Chan
- Location: Temecula, CA
Re: schematics for Bunswick balke Model T
Haven't you guys heard of the Brunswick parts list? It has blow ups of all those motors and shows all the parts. Marc.
-
- Victor Jr
- Posts: 6
- Joined: Sat Sep 28, 2013 6:28 pm
Re: schematics for Bunswick balke Model T
where can i find said list. i took apart my springs and found one of them broken and it only has 3 springs in it. really need to get picsHaven't you guys heard of the Brunswick parts list? It has blow ups of all those motors and shows all the parts.
-
- Victor Jr
- Posts: 6
- Joined: Sat Sep 28, 2013 6:28 pm
Re: schematics for Bunswick balke Model T
Adding a link to my facebook with the photos of my Phonograph Enjoy-ish
https://www.facebook.com/media/set/?set ... f111522044
https://www.facebook.com/media/set/?set ... f111522044
-
- Victor IV
- Posts: 1269
- Joined: Sun Oct 25, 2009 12:53 pm
- Location: Michiana
Re: schematics for Bunswick balke Model T
That's a Type C motor in your machine. The examples that I've owned (or scrapped) had the type B units. I wondr what your serial number is? You may have a late production machine turned out just beofre the Panatrope series was released.
-
- Victor Jr
- Posts: 6
- Joined: Sat Sep 28, 2013 6:28 pm
Re: schematics for Bunswick balke Model T
the serial number is. well the medallion model number T 113680 its also stamped in to the wood on the front of the phonograph