Unusual One-Sided Victor with large spindle hole

Discussions on Records, Recording, & Artists
Post Reply
User avatar
briankeith
Victor IV
Posts: 1874
Joined: Mon Jul 25, 2011 8:27 am
Personal Text: Jeepster
Location: Blairstown, New Jersey 07825

Unusual One-Sided Victor with large spindle hole

Post by briankeith »

I found this unsual Victor record with a large spindle hole - sorta like the type Columbia client machines use. Harmony and Symphony.
I does not appear to have been drilled - looks factory punched out, very smooth hole. Did Victor make these to be played on the larger spindle machines, or did someone carfully alter these records ?? Just very curious, never seen one like this before.........
Attachments
$_57.jpg

User avatar
FellowCollector
Victor V
Posts: 2083
Joined: Tue Jul 07, 2009 7:22 pm
Contact:

Re: Unusual One-Sided Victor with large spindle hole

Post by FellowCollector »

This was undoubtedly drilled...IMHO...albeit cleanly perhaps by a very sharp, very high speed drill or milling machine.

Joe_DS
Victor I
Posts: 190
Joined: Tue Dec 17, 2013 10:15 pm

Re: Unusual One-Sided Victor with large spindle hole

Post by Joe_DS »

Hi Brian:

I agree with Doug, especially if you compare that with a conventional Grand Prize label from the period --
Capture.JPG
Capture.JPG (61.36 KiB) Viewed 994 times
Can't quite tell, but in the photo you provided it looks like a tiny bit of the title was also nipped off by the large hole.

Joe

User avatar
Wolfe
Victor V
Posts: 2759
Joined: Wed Jan 07, 2009 6:52 pm

Re: Unusual One-Sided Victor with large spindle hole

Post by Wolfe »

Victor would have never altered their product for "competitor" machines.

User avatar
OrthoSean
Victor V
Posts: 2912
Joined: Thu Jan 08, 2009 1:33 pm
Location: Near NY's Capital

Re: Unusual One-Sided Victor with large spindle hole

Post by OrthoSean »

Wolfe wrote:Victor would have never altered their product for "competitor" machines.
No, they certainly didn't. A couple of years ago, a friend picked up a box of 78s at an auction for a buck and brought them over to me. About half of them were Standards, the rest were Victor and Columbia single faced discs that had been drilled out and very well done at that. There ended up being some nice records in the box, too, especially the Victors, loads of Collins and Murrays. I couldn't be angry about the whole thing since they were mostly very clean and obviously done at the time they were new. Who could blame them, really, there were some good things put out on client labels, but most of it was outdated material.

Sean

User avatar
FellowCollector
Victor V
Posts: 2083
Joined: Tue Jul 07, 2009 7:22 pm
Contact:

Re: Unusual One-Sided Victor with large spindle hole

Post by FellowCollector »

About 15 years ago I stopped into a yard sale that had some interesting antiques out on the lawn. After browsing a bit I asked the owner if they had any old records or players. A gentleman brought out a small box with 10 seven inch Berliner records and a few etched label seven inch Zonophone records. Every one had been drilled to fit a Standard Talking Machine - and very poorly at that. :cry: Oh the humanity! And all of them were in very nice condition otherwise.

Post Reply