![[The Talking Machine Forum - For All Antique Phonographs & Recordings]](/styles/we_universal/theme/images/the_talking_machine_forum.png)
They all look identical to me, but there must be some differences, yes?
Victrola Induction Disc Motors
-
Edisone
- Victor IV
- Posts: 1140
- Joined: Sat Aug 01, 2009 5:17 pm
- Location: Can see Canada from Attic Window
Victrola Induction Disc Motors
I find that I have 3 variations of the AC Induction Disc motor used in Orthophonic Credenzas and other Victrolas: One is marked "25-40 Cycles per second" and is in an 8-30X I bought from a part of Buffalo which had 25Hz power until some time in the 1940s, another is "60 Cycles per seond" which came from Ebay (I wanted to have a spare, in case the first one croaked) and the latest acquisition is "25-60 Cycles per second", in a 1926 Credenza X.
They all look identical to me, but there must be some differences, yes?
They all look identical to me, but there must be some differences, yes?
-
ChuckA
- Victor III
- Posts: 589
- Joined: Thu Jan 15, 2009 6:32 pm
- Personal Text: Learn from the mistakes of others - You can't live long enough to make them all yourself.
- Location: South Eastern PA
- Contact:
Re: Victrola Induction Disc Motors
The differences are in the coils.
From 1931 Service Bulletin Supplement:
105 to 120 Volts
Part # 16355 is 40 to 60 cycles
Part # 17576 is 25 to 30 cycles
Part # 17860 is 40 to 60 cycles - For Automatic Machines
For 40 cycle operation there was a tapped 31 ohm resistor
There were also transformers available for operation on 220 or 200 or 150 volts 60 cycles
Chuck
From 1931 Service Bulletin Supplement:
105 to 120 Volts
Part # 16355 is 40 to 60 cycles
Part # 17576 is 25 to 30 cycles
Part # 17860 is 40 to 60 cycles - For Automatic Machines
For 40 cycle operation there was a tapped 31 ohm resistor
There were also transformers available for operation on 220 or 200 or 150 volts 60 cycles
Chuck