Putting wax on a 78?

Discussions on Records, Recording, & Artists
Post Reply
User avatar
ImperialGuardsman
Victor II
Posts: 215
Joined: Fri Sep 21, 2012 4:01 pm
Personal Text: Nothing like blaring Caruso out of your college dorm window...
Location: Oregon

Putting wax on a 78?

Post by ImperialGuardsman »

In this Youtube video (http://www.youtube.com/watch?v=9XYCI9Ud2QE) at about 3:28, it looks like he rubs some wax unto the record as it spins. In fact, it seems that most of his records (if not all) have wax lines on them (I thought he just had scratched records at first). Is this a common/recomended practice?

As for his videos, I do like them. He has many reproducer comparisons.
ImperialGuardsman

OTAPS (Oregon Territory Antique Phonograph Society) Member


~Also a member of Suscipe Domine and The High Road forums~

User avatar
Roaring20s
Victor V
Posts: 2764
Joined: Wed Jun 13, 2012 1:55 am
Personal Text: Those who were seen dancing were thought insane by those who could not hear the music. Nietzsche
Location: Tucson, AZ

Re: Putting wax on a 78?

Post by Roaring20s »

Here is a brief discussion from the forums' section Tips, Tricks & Technical Info
http://forum.talkingmachine.info/viewto ... f=7&t=7077

Here is some stuff that was sold to juke box owners in 1944.
Don't know what it was, perhaps a type snake oil. :o
junk.jpg
junk.jpg (97.99 KiB) Viewed 1152 times
Lightly waxing a worn record is my personal preference. If the record will never see an electric pick-up, less resistance will assist a fiber needle's journey along the groove. I only play my records acoustically. A few drips of wax worked into the fiber of a clean cotton cloth, and used to buff a clean record surface, that's all. This is usually a one time event after cleaning a worn record for the first time. Few records get a later application. Use a record duster before and after each play. No ill affects to be noted in ten years.

That youtube demonstration shows why I rarely use a steel needle any more. The range of fiber needles is kinder on my ears. You can also make the needle thinner with a razor to lower the volume to a whisper.

Experimentation is the best way to decide for yourself.

James.

User avatar
ImperialGuardsman
Victor II
Posts: 215
Joined: Fri Sep 21, 2012 4:01 pm
Personal Text: Nothing like blaring Caruso out of your college dorm window...
Location: Oregon

Re: Putting wax on a 78?

Post by ImperialGuardsman »

James,

Thanks for the info. However, what about just using steel needles? Is there a benefit there or would the needle just cut through the wax?
ImperialGuardsman

OTAPS (Oregon Territory Antique Phonograph Society) Member


~Also a member of Suscipe Domine and The High Road forums~

User avatar
Roaring20s
Victor V
Posts: 2764
Joined: Wed Jun 13, 2012 1:55 am
Personal Text: Those who were seen dancing were thought insane by those who could not hear the music. Nietzsche
Location: Tucson, AZ

Re: Putting wax on a 78?

Post by Roaring20s »

In the past, when I used steel needles, I had a few records that would drag to a halt when played. It's fair to say; a spring could be weak, the motor could use an oiling, a heavy tone arm is in use, and all could factor into this. That being said, I experimented on it and rubbed a ridiculous coating of wax on it. It played. It also made a mess. I do not see it as an aide if you are using steel needles.

James.

Post Reply