The video picks up a good deal of surface noise, as you will see. I assure you, when you put the lid down almost all the surface noise disappears and what comes through the horn is very, very nice for an acoustical recording. Even with this imperfect video, you can hear the violin coming through strong and vibrant.
My main variance from Paul's method is that I angle the reproducer up and away from the record surface so that I did not have to bend the Pathé stylus very much. The up-side of this variance is that the less-bent stylus is better at transmitting the signal; the down-side is that the angled reproducer brings the stylus across the record a bit behind the normal arc that (if one could play through the record label) would end at the spindle.
Another (small) variance of mine is that I had the thumb screw cut down by a jeweler to create extra clearance between it (at this "vertical" orientation) and the record surface; this too to lessen the need to bend the Pathé stylus very much.
The record is Pathé 22417 B, Joseph Samuels playing "Medley of Country Jigs."
http://www.youtube.com/watch?v=1k7NIUqR ... aQ&index=1
Ralph
P.S. This is one of my more worn-out Pathé vertical discs; came to me that way with some skips. But I'm a softy for Irish music
