Needed: Parts for Columbia Viva Tonal 800

[marcapra]

I have a Columbia Viva Tonal 800. I need some small parts that go on the motor board, the crank escutcheon, and screws. I need the Start/Stop lever and the metal part that goes on the motor board, also the Speed plate that goes on the other side. Need crank escutcheon and all motor board screws. I think the motor board is the same for most other floor model Viva Tonals. I'm willing to buy the whole motor board if you have a good one.

[phonomaven]

pm sent.

[marcapra]

I still need the Start lever and plate and the Speed control plate and the screws for those plates that are located just in front of the turntable on my Columbia V T 800. The screw holes on the plates are approximately 2 ½ inches apart. I also need all the screws for the motor board and the complete escutcheon for the crank hole and screws. The plates and lever should be gold plated, but will take nickel plated parts if they are the right size. Not sure if the Columbia V T 700, 710 interchange. Thanks for your help. Marc.