Methods for cleaning portable

Share your phonograph repair & restoration techniques here
Post Reply
a12548
Victor I
Posts: 152
Joined: Sun Feb 26, 2012 2:31 pm

Methods for cleaning portable

Post by a12548 »

I have a dusty dull VV 2-60 portable, with really dulled vinyl (or whatever the covering is). Has anyone used any cleaners that brought back some reasonable results? A good wipe with a damp rag brought up a lot of dirt, but when it dries, its clean, but looks really drab.

User avatar
FloridaClay
Victor VI
Posts: 3708
Joined: Wed Jan 26, 2011 7:14 pm
Location: Merritt Island, FL

Re: Methods for cleaning portable

Post by FloridaClay »

I just went through that this week with a Brunswick portable. On that one at least the covering is something like a version of old fashioned oil cloth, fabric with a thin coating of some sort to produce an imitation leather appearance. I expect that is fairly typical.

What I did was clean it well with saddle soap and, after thoroughly dry, follow that up with a good quality paste neutral (i.e., clear) shoe polish and a buffing. Of course it will never look show room new again, but this improved its appearance considerably and gives some protection without drying out the covering or making it look overly glossy. It looks period, but as having been better cared for than was the case.

Often the nickel plated hinges and lid locks are in poor nick on portables. On the Brunswick they were rusted and discolored. After trying a bit of mild auto polishing compound and finding that there was almost no plating left, I had at them with the wire brush attachment on a Dremel to remove the rust, followed with a light coat of auto wax to afford a bit of protection. The result still looks old, but also as having been better cared for over the years than it actually was.

Clay
Arthur W. J. G. Ord-Hume's Laws of Collecting
1. Space will expand to accommodate an infinite number of possessions, regardless of their size.
2. Shortage of finance, however dire, will never prevent the acquisition of a desired object, however improbable its cost.

a12548
Victor I
Posts: 152
Joined: Sun Feb 26, 2012 2:31 pm

Re: Methods for cleaning portable

Post by a12548 »

Thanks Clay..I had heard it suggested about the neutral polish, and now that you second that, its a go.

User avatar
epigramophone
Victor Monarch Special
Posts: 5754
Joined: Mon Oct 24, 2011 1:21 pm
Personal Text: An analogue relic trapped in a digital world.
Location: The Somerset Levels, UK.

Re: Methods for cleaning portable

Post by epigramophone »

I have de-rusted exterior case fittings by immersing them overnight in spirit vinegar, any residue of which can be neutralised by immersion in turpentine substitute, otherwise known as white spirit.

Phono48
Victor IV
Posts: 1325
Joined: Sun May 27, 2012 2:38 pm
Location: United Kingdom

Re: Methods for cleaning portable

Post by Phono48 »

epigramophone wrote:I have de-rusted exterior case fittings by immersing them overnight in spirit vinegar, any residue of which can be neutralised by immersion in turpentine substitute, otherwise known as white spirit.
This sounds very promising. Apologies for my ignorance, but what is "spirit vinegar", please? Not the stuff you put on your egg and chips, I take it?

User avatar
epigramophone
Victor Monarch Special
Posts: 5754
Joined: Mon Oct 24, 2011 1:21 pm
Personal Text: An analogue relic trapped in a digital world.
Location: The Somerset Levels, UK.

Re: Methods for cleaning portable

Post by epigramophone »

Spirit Vinegar is colourless and it's main culinary use, according to my wife, is for pickling.

Malt Vinegar is the brown stuff you sprinkle on your chips. It might also work as a de-ruster but could leave a residue.

Phono48
Victor IV
Posts: 1325
Joined: Sun May 27, 2012 2:38 pm
Location: United Kingdom

Re: Methods for cleaning portable

Post by Phono48 »

Right! Off to buy a bottle straight away, thanks.

Post Reply