Brass Cylinder Horn

Discussions on Talking Machines & Accessories
Post Reply
User avatar
Phonofolks
Victor I
Posts: 168
Joined: Thu Jan 22, 2009 10:54 am

Brass Cylinder Horn

Post by Phonofolks »

I cleaned the outside of a heavily tarnished 36" brass horn recently. As I removed the tarnish I noticed as the brass came shining through that the brass looked more like a "brushed brass" rather than a mirror finish. I used never dull in one spot to see if I could polish up the brass, but after polishing the horn still had a brushed looked. Were there cylinder horns that originally had a brushed finish?

Post Reply