Baby Phonograph

Discussions on Talking Machines & Accessories
Phonofreak
Victor VI
Posts: 3720
Joined: Tue Mar 23, 2010 7:00 pm
Location: Western, WA State

Baby Phonograph

Post by Phonofreak »

I was very fortunate to get a Baby Phonograph. It was ebay #291011600753. There is hardly any information for this little machine. The machine was manufactured by Garford Manufacturing CO. Elyria, Ohio. I'm trying to find information about it. Was it a children's phonograph? When were they manufactured? Were they specifically designed for the Little Wonder records? As you can see in the listing, the machine is in decent condition. I know I have work to do on the reproducer, but it's doable. One thing I am looking for, on the side where the speed control goes is a paper label. There is only half of it there. Does any one have one of these machines with a good label? If so, I would like to have a scan, and apply it to my machine. Any information about this machine, or scan will be greatly appreciated.
Harvey Kravitz

User avatar
Roaring20s
Victor V
Posts: 2764
Joined: Wed Jun 13, 2012 1:55 am
Personal Text: Those who were seen dancing were thought insane by those who could not hear the music. Nietzsche
Location: Tucson, AZ

Re: Baby Phonograph

Post by Roaring20s »

Harvey, from what I understand these are not solely for children, as the ad says "fine for the children".

Harvey's Baby...
Baby.jpg
Baby.jpg (41.22 KiB) Viewed 2601 times
Advertisements...
1921 ad.png
1921 ad.png (27.06 KiB) Viewed 2601 times
TMW ad.1.png
TMW ad.1.png (202.19 KiB) Viewed 2601 times
TMW ad.2.png
TMW ad.2.png (199.51 KiB) Viewed 2601 times
James.

User avatar
De Soto Frank
Victor V
Posts: 2687
Joined: Wed Dec 01, 2010 1:27 pm
Location: Northeast Pennsylvania

Re: Baby Phonograph

Post by De Soto Frank »

Does the music come-out two octaves higher than from a normal-size talking machine ?

;)
De Soto Frank

User avatar
howardpgh
Victor II
Posts: 432
Joined: Sun Mar 10, 2013 4:34 pm
Location: Pittsburgh

Re: Baby Phonograph

Post by howardpgh »

Garford was a manufacturer of telephones. I think they changed to Leich telehones.

User avatar
antique1973
Victor IV
Posts: 1281
Joined: Mon Mar 22, 2010 3:30 am
Personal Text: Victor Z, Victrola 4-3

Re: Baby Phonograph

Post by antique1973 »

Just so you are aware, the Baby is really tough to repair if there
is a motor problem. If its working 'ok' its best to leave well enough
alone.

Phonofreak
Victor VI
Posts: 3720
Joined: Tue Mar 23, 2010 7:00 pm
Location: Western, WA State

Re: Baby Phonograph

Post by Phonofreak »

Actually,
The motor works fine, but it is more to display. I'm working on the reproducer. It is pot metal with many cracks running through it. I filled all the cracks with super glue and JB weld. Everything is set and the reproducer is intact. All I have to do is paint the reproducer and assemble all the parts. The machine is in remarkable condition. On the right side where the crank goes, there is a paper label glued onto the case. Only half of the label remains. If any one has a Baby phonograph with this label, I sure would appreciate a scan. I would print it out and put it on my Baby. When it gets finished, I'll have one of my buddies post it. Thanks for all the responses so far.
Harvey Kravitz

Uncle Vanya
Victor IV
Posts: 1269
Joined: Sun Oct 25, 2009 12:53 pm
Location: Michiana

Re: Baby Phonograph

Post by Uncle Vanya »

howardpgh wrote:Garford was a manufacturer of telephones. I think they changed to Leich telehones.
Garford was a manufacturer of bicycles. It began as the Fay Mfg. Co. back in the early 'Ninties, and after Art Garford's retirement was purchashed by Geo. Worthington Hardware. The telephones, which are assembled units using Eureka, Leich and North Electric components were distributed by Worthington, and may have assembled in Elyria, or thay may have been produced for Worthington by North electric, which shared a directors with both Worthington and Garford Mfg in the 'Teens.

By the mid 1920's the firm had been spun off on its own as the Colson Company. The Colson firm was later the subject an early example of the LBO by the Pritker interests, wherin a firm was purchased with a great deal of debt, which debt was subsequently redeemed by draining the firm's pension fund before moving production away to the South. There were two other Garford enterprises in Elyria, the Garford Motor Company, manufacturers of the Garford automobile and the "Studebaker-Garford", and the Garford Truck Company, which eventually became Superior Coach Works, makers of the famous Superior school buses and funeral cars. After the the Garford Motor Company was absorbed into Willys-Overland the Garford Automobile mfg plant was leased by Otto Heinemann's General Phonograph Company for the manufacture of talking machine sundries, eventually becoming the General Industries Company.

Jerry B.
Victor Monarch Special
Posts: 8716
Joined: Tue Feb 10, 2009 11:25 am
Personal Text: Stop for a visit when in Oregon.
Location: Albany, Oregon

Re: Baby Phonograph

Post by Jerry B. »

Here are a few photos of Harvey's Baby machine.
Attachments
DSC02063.JPG
DSC02064.JPG
DSC02065.JPG

Phonofreak
Victor VI
Posts: 3720
Joined: Tue Mar 23, 2010 7:00 pm
Location: Western, WA State

Re: Baby Phonograph

Post by Phonofreak »

The last picture shows half of a label that was on the side of the machine. If someone has a Baby phonograph with a complete label, I would like a scan of this, so I can apply this to my machine. Thanks in advance for any help.
Harvey Kravitz

dawgchyper91
Victor Jr
Posts: 14
Joined: Thu Jan 02, 2014 10:23 pm

Re: Baby Phonograph

Post by dawgchyper91 »

Phonofreak wrote:I was very fortunate to get a Baby Phonograph. It was ebay #291011600753. There is hardly any information for this little machine. The machine was manufactured by Garford Manufacturing CO. Elyria, Ohio. I'm trying to find information about it. Was it a children's phonograph? When were they manufactured? Were they specifically designed for the Little Wonder records? As you can see in the listing, the machine is in decent condition. I know I have work to do on the reproducer, but it's doable. One thing I am looking for, on the side where the speed control goes is a paper label. There is only half of it there. Does any one have one of these machines with a good label? If so, I would like to have a scan, and apply it to my machine. Any information about this machine, or scan will be greatly appreciated.
Harvey Kravitz

Would love to see a finished product or even some of the restoration you have performed on this baby phonograph when you get the chance. Very neat pick up!! Great addition to the collection :)

Post Reply