Page 1 of 1

Victor Victrolita 1-1

Posted: Thu Jan 16, 2014 1:20 pm
by briankeith
Doe the small pancake motor Victor Victrolita 1-1 use a male or female crank handle ??

Re: Victor Victrolita 1-1

Posted: Thu Jan 16, 2014 2:05 pm
by Jerry B.
The crank in my 1-2 (same machine with children's Bubble Book decoration) uses a crank with male threads. I hope this helps. Jerry Blais

Re: Victor Victrolita 1-1

Posted: Thu Jan 16, 2014 3:40 pm
by briankeith
Thanks Jerry! PS: I love the childrens version of the VV 1-1.

Re: Victor Victrolita 1-1

Posted: Thu Jan 16, 2014 4:41 pm
by JerryVan
If you ever try to unscrew the crank on one of these, do it somewhat gently, if possible. There is no ratchet & pawl on the winding shaft but, instead, a spring that wraps around the shaft, allowing it to turn in one direction only, (like a lot of cheaper brands used). If that spring should break, which they love to do, you'll have a heck of a time getting the crank out.