Spring Grease

Share your phonograph repair & restoration techniques here
Post Reply
phonofaninfl
Victor Jr
Posts: 14
Joined: Wed Jun 24, 2009 1:31 pm
Location: Jacksonville Fl.

Spring Grease

Post by phonofaninfl »

recently restored a Pathé model 50 disc table top machine. I have always used automotive bearing grease to lube the mainsprings of all machines. This machine however seems to need another type. Any Ideas ?

Victrolacollector
Victor V
Posts: 2708
Joined: Fri Nov 18, 2011 11:23 pm
Location: NW Indiana VV-IV;

Re: Spring Grease

Post by Victrolacollector »

Does this have the double spring Heineman "Motor of Quality"?

I have used black Moly-Lithium Grease on Heineman Motors. Some choose to oil the gears, some grease them, I finally resorted to cleaning and then a little moly lithium grease on all gears except the "Fiber" spindle gear. Do not oil or grease the fiber gear. However, Starr service literature does tell you to lubricate it, but do not as this can cause wear to this gear.

I chose to grease the gears as the gears are a little worn on the motor. Motor wear seems very common on Heineman Motors.

phonofaninfl
Victor Jr
Posts: 14
Joined: Wed Jun 24, 2009 1:31 pm
Location: Jacksonville Fl.

Re: Spring Grease

Post by phonofaninfl »

No this motor looks more like the motors That I have seen on French Pathés. It was made using no castings or fiber gears

Post Reply