WANTED: tonearm, brake and other parts for Victor CD-20

[Green Mountain Bill]

Hello All: I a rebuilding a Victor CD-20 countertop demonstration turntable and need these parts: gold electric tonearm, brake with built-in on/off switch, and the gold turntable platter. I do not necessarily need the electric reproducer with the tonearm but would welcome a nice one. The photo of the brake shows that someone cut off the end with the auto-stop lever on the one I have. I have a platter but the edge is painted gold and the felt is bad so one with good gold plating and felt is needed.

All of these parts were also used on other Victor Electrola models.

Please let me know what you have available.

Thanks,
Green Mountain Bill[/b]

Vic CD-20 Tonearm.jpg (54.76 KiB) Viewed 682 times

CD-20 brake-top sm.jpg (149.1 KiB) Viewed 682 times

CD-20 brake-bottom-sm.jpg (216.06 KiB) Viewed 682 times

[rizbone]

I may have the brake you need. See my reply on your previous post.

[Green Mountain Bill]

I may have the brake you need. See my reply on your previous post.

Rizbone: I found your picture and it does appear to be the same one. I couldn't see the ON and OFF marked on the top and bottom of the lever edge but maybe it is just the picture resolution.

What are you asking for it?

Regards,
GMBill

[rizbone]

Just postage. IM me an address if you want it.