Page 1 of 2

Anyone want a refinish job?

Posted: Fri Oct 30, 2015 4:57 pm
by ambrola
I have a green long case Home. It is the 2nd model A which takes the red banner on the case. I have never finished one with the green in it, so would someone take this on? Case will be stripped and ready to stain.

Re: Anyone want a refinish job?

Posted: Fri Oct 30, 2015 9:23 pm
by Phonoboy
Amberola wrote:I have a green long case Home. It is the 2nd model A which takes the red banner on the case. I have never finished one with the green in it, so would someone take this on? Case will be stripped and ready to stain.
Are you sure you want to refinish it?
Original is only original once.

Re: Anyone want a refinish job?

Posted: Sat Oct 31, 2015 1:42 pm
by ambrola
Phonoboy wrote:
Amberola wrote:I have a green long case Home. It is the 2nd model A which takes the red banner on the case. I have never finished one with the green in it, so would someone take this on? Case will be stripped and ready to stain.
Are you sure you want to refinish it?
Original is only original once.
Yes, it is too far gone. Luckily, the motor runs smooth and the bedplate will clean up nicely.
DSC_0003.JPG

Re: Anyone want a refinish job?

Posted: Sat Oct 31, 2015 1:55 pm
by Phonoboy
I think it could be saved. The crackled finish can be remedied, the rest might be corrected with touch ups.
I'd exhaust all possibilities before striping.

Re: Anyone want a refinish job?

Posted: Sat Oct 31, 2015 6:06 pm
by Curt A
Before you strip it, try GoJo or Goop hand cleaner on it and see what it does... use the type with no pumice.

Re: Anyone want a refinish job?

Posted: Sat Oct 31, 2015 6:08 pm
by Curt A
If the hand cleaner doesn't work, try rubbing alcohol to re-amalgamate the original finish.

Re: Anyone want a refinish job?

Posted: Sun Nov 01, 2015 1:14 pm
by ambrola
This one going to Martin or Martinola on the board. He will work his magic on it and see if he can save the original finish. I was very impressed with his work on the green Standard he finished.

Re: Anyone want a refinish job?

Posted: Tue Nov 03, 2015 1:47 am
by Lucius1958
Amberola wrote:I have a green long case Home. It is the 2nd model A which takes the red banner on the case. I have never finished one with the green in it, so would someone take this on? Case will be stripped and ready to stain.
That certainly looks like the later style, black letter banner to me... :?

Bill

Re: Anyone want a refinish job?

Posted: Tue Nov 03, 2015 8:08 am
by ambrola
Lucius1958 wrote:
Amberola wrote:I have a green long case Home. It is the 2nd model A which takes the red banner on the case. I have never finished one with the green in it, so would someone take this on? Case will be stripped and ready to stain.
That certainly looks like the later style, black letter banner to me... :?

Bill
Do you suppose the old banner turned red? It is the one that has been on it since the beginning. I can see no clues it has ever had a refinish?
DSC_0007.JPG

Re: Anyone want a refinish job?

Posted: Tue Nov 03, 2015 8:59 am
by Phono-Phan
This one is worthy of any effort to keep the original finish. If it was mine, I would try the suggested remedies and not strip it.