WANTED: Early style flat Victrola VV-IV crank

[benjaminh]

I'm looking for an early style flat Victrola VV-IV crank? Anyone have an available one?

Benjamin

[benjaminh]

bump

[benjaminh]

No one have one? I'm also looking for the matchine estucheon.

Benjamin

[alang]

Have you tried George Vollema of Great Lakes Phonograph or Ron Sitko?
Good luck
Andreas

[benjaminh]

I've tried George Vollema, but unfortunately Ron Sitko, who I usually use, is away(or closed) until the beginning of January. George Vollema only has repros for $40. I'd like to find an original if possible.

[Phonofreak]

Ben, There are 2 different thread sizes for this crank. The early one used a ¼" thread. The later ones used a 3/16" thread. Post a picture of your machine with the S/N, and I can help you find the right crank.
Harvey Kravitz

[benjaminh]

Here's the info: the serial number is “150051 E” and pictures showing crank location are included below.

[benjaminh]

Bump

[a12548]

Actually the early IV cranks were 5/16" female

[Bob]

I have 2 cranks and one might be what you need. The longer one is 5/16-24 thread and the shorter one is ¼. The longer one is 5" long and the shorter is 3 ⅞" long. Not sure what model they are for.
Bob