![[The Talking Machine Forum - For All Antique Phonographs & Recordings]](/styles/we_universal/theme/images/the_talking_machine_forum.png)
Refurbishing an orphan HMV 101 portable, which is entirely missing its spring barrel from the motor. Thank you in advance.
ADDENDUM: Thanks to Epigramophone for clarifying the motor number issue. In addition to the spring barrel and spring, I also need one (or a set) of screws for the governor springs (the end of one is detached, but not broken) as well as the circlip for the turntable hold-down.
Thanks again,
Charlie
WANTED: Spring barrel with spring for HMV 101 Motor #410
-
CharliePhono
- Victor III
- Posts: 923
- Joined: Fri Sep 30, 2016 2:41 pm
- Location: North Fork, CA
WANTED: Spring barrel with spring for HMV 101 Motor #410
Last edited by CharliePhono on Sat Jun 30, 2018 4:12 pm, edited 1 time in total.
-
epigramophone
- Victor Monarch Special
- Posts: 5690
- Joined: Mon Oct 24, 2011 1:21 pm
- Personal Text: An analogue relic trapped in a digital world.
- Location: The Somerset Levels, UK.
Re: WANTED: Spring barrel with spring for HMV 101
To be sure of getting the right part you need to specify which motor your 101 has.
Depending on the model version and year it could be either a 425, a 410, a 59 or a 270 series.
Depending on the model version and year it could be either a 425, a 410, a 59 or a 270 series.
-
CharliePhono
- Victor III
- Posts: 923
- Joined: Fri Sep 30, 2016 2:41 pm
- Location: North Fork, CA
Re: WANTED: Spring barrel with spring for HMV 101
It is a 410. Thank you for calling that to my attention.epigramophone wrote:To be sure of getting the right part you need to specify which motor your 101 has.
Depending on the model version and year it could be either a 425, a 410, a 59 or a 270 series.