Portable Victrola 2-60 for parts or restore $35 and shipping

[EarlH]

This little guy does need a fair amount of work, but the case is in pretty good shape and the lift handle seems to be really good (which I have not seen very often). The reproducer and tone arm bracket and not very good and someone did put some epoxy on the back bracket screw a long time ago. The motor runs fine, and I'm sure it needs to be serviced. This is pretty much the way I found it a few weeks ago. I wiped it off some, but you can see that most of the dirt, et. is still in place! Anyway, if you have any questions or if you need more pictures feel free to ask. I've played a few records on it and it does play all the way through, but it really doesn't sound like it should for obvious reasons.

[CharliePhono]

Hi Earl, a seller on eBay who goes by johnny_walker58 is selling 3D printed brackets for the 2-55 and 2-60. Maybe this would encourage a potential buyer

https://www.ebay.com/itm/335274590164?i ... Sw6X9l24MY

[Jop Amberola 30]

I’ll take it if we can work out a fair deal for UPS to MO zip 64801. I’ll send you a PM.