![[The Talking Machine Forum - For All Antique Phonographs & Recordings]](/styles/we_universal/theme/images/the_talking_machine_forum.png)
Hello all
I am trying to help a woman find a crank for her VV-215S. It is a common machine so I wouldn't think it is too hard a part to find. She has the Victrola that her dad gave her mother as a wedding present in the late twenties, but somehow misplaced the crank. She has been carting this victrola around with her for over 40 years and would really like to hear it again, and I would like to help her.
Thanks
John Robles
WTB crank for VV-215
-
Jerry B.
- Victor Monarch Special
- Posts: 8718
- Joined: Tue Feb 10, 2009 11:25 am
- Personal Text: Stop for a visit when in Oregon.
- Location: Albany, Oregon
Re: WTB crank for VV-215
I don't have that machine in my collection but I have a bunch of extra cranks. How far is it from the end with the threads to the first turn? Jerry
-
john9ten
- Victor II
- Posts: 399
- Joined: Wed Nov 18, 2009 9:13 pm
Re: WTB crank for VV-215
Hi Jerry
Not having the crank, I have no idea. The machine is in Southern CA somewhere, I haven't seen it personally. It's a mystery!
Not having the crank, I have no idea. The machine is in Southern CA somewhere, I haven't seen it personally. It's a mystery!
-
lakesideglenn
- Victor Jr
- Posts: 27
- Joined: Thu Mar 31, 2011 7:28 am
- Location: Blackwood NJ
Re: WTB crank for VV-215
I have a 215 ....will check the crank dimensions when i get home at get back to you this evening.
Glenn
Glenn
-
lakesideglenn
- Victor Jr
- Posts: 27
- Joined: Thu Mar 31, 2011 7:28 am
- Location: Blackwood NJ
Re: WTB crank for VV-215
Here are the dimensions for my VV 215 crank which is original. I'll start at the handle end and go to the threaded end.
3in x 5in by 5 ¾ in
⅜ diameter
last 3/4in threaded, male end with typical bullet shaped tip...tip included in the ¾ in measurement.
Hope this helps, I'm sure Jerry or someone else can come up with one for you.
Good luck and cheers!
Glenn
3in x 5in by 5 ¾ in
⅜ diameter
last 3/4in threaded, male end with typical bullet shaped tip...tip included in the ¾ in measurement.
Hope this helps, I'm sure Jerry or someone else can come up with one for you.
Good luck and cheers!
Glenn
-
Guest
Re: WTB crank for VV-215
Hi Glenn
I am not sure I understand the measurement of 3x5x5-¾...Oh, is the 3" the actual handle portion with the knob?
John
[quote="lakesideglenn"]Here are the dimensions for my VV 215 crank which is original. I'll start at the handle end and go to the threaded end.
3in x 5in by 5 ?? in
??? diameter
last 3/4in threaded, male end with typical bullet shaped tip...tip included in the ?? in measurement.
Hope this helps, I'm sure Jerry or someone else can come up with one for you.
Good luck and cheers!
Glenn[/quote]
I am not sure I understand the measurement of 3x5x5-¾...Oh, is the 3" the actual handle portion with the knob?
John
[quote="lakesideglenn"]Here are the dimensions for my VV 215 crank which is original. I'll start at the handle end and go to the threaded end.
3in x 5in by 5 ?? in
??? diameter
last 3/4in threaded, male end with typical bullet shaped tip...tip included in the ?? in measurement.
Hope this helps, I'm sure Jerry or someone else can come up with one for you.
Good luck and cheers!
Glenn[/quote]
-
lakesideglenn
- Victor Jr
- Posts: 27
- Joined: Thu Mar 31, 2011 7:28 am
- Location: Blackwood NJ
Re: WTB crank for VV-215
John, picture the crank laying flat on the ground with wood handle horizontal on the left side:
3inches from tip of handle to outside of 1st 90degree bend down
5 in from outside of that bend to outside of next bend (90 deg right)
5 ¾ in from outside of that bend to end of threaded tip that goes into machine
⅜ diameter, last ¾ threaded
Hope this helps!
3inches from tip of handle to outside of 1st 90degree bend down
5 in from outside of that bend to outside of next bend (90 deg right)
5 ¾ in from outside of that bend to end of threaded tip that goes into machine
⅜ diameter, last ¾ threaded
Hope this helps!