C19 governor sleeve?

Discussions on Talking Machines & Accessories
Post Reply
User avatar
BwanaJoe
Victor II
Posts: 278
Joined: Thu Nov 13, 2014 8:54 am
Location: Central Florida

C19 governor sleeve?

Post by BwanaJoe »

Hello,

Probably a dumb question but, is the governor sleeve the large tube on the left side of the shaft?
Attachments
image.jpg

Victrolaboy
Victor III
Posts: 502
Joined: Tue Nov 11, 2014 10:03 pm
Location: Franklin, Tennessee

Re: C19 governor sleeve?

Post by Victrolaboy »

Yes that is the governor sleeve. As the weights expand the felt pads rub against the brake disc (left).
-Nick
Nick Hoffmann

User avatar
BwanaJoe
Victor II
Posts: 278
Joined: Thu Nov 13, 2014 8:54 am
Location: Central Florida

Re: C19 governor sleeve?

Post by BwanaJoe »

Victrolaboy wrote:Yes that is the governor sleeve. As the weights expand the felt pads rub against the brake disc (left).
-Nick
Thanks.

So, how do you oil it? Turn the machine on its side and let it drip in? (I'd assume not since the owners manual never says to remove the motor for service) Just oil the shaft?

User avatar
phonogfp
Victor Monarch Special
Posts: 8164
Joined: Wed Jan 07, 2009 5:08 pm
Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
Location: New York's Finger Lakes

Re: C19 governor sleeve?

Post by phonogfp »

Yes, a drop of that new Singer oil on the shaft will do the trick. :)

George P.

Post Reply