I'm looking for an Edison Triumph to use as a workhorse cylinder player. 
Requirements:
Must have 2-4 minute attachment
Must have the larger, vertical carriage
Preferably, I'd like one with a nice original finish, both case and bedplate, though I would take a project machine were the price right.
Benjamin
			
			
									
									
						WANTED: Edison Triumph Phonograph
- 
				
				benjaminh
- Victor II
- Posts: 403
- Joined: Tue Sep 01, 2015 8:49 pm
- 
				
				ambrola
- Victor IV
- Posts: 1502
- Joined: Sat Dec 29, 2012 11:20 am
- Personal Text: Be Careful What You Say, You Can't T ake It Back!
- Contact:
Re: WANTED: Edison Triumph Phonograph
You just missed a good one on eBay. Had a steel O reproducer and a 10 panel cygnet horn which isn't correct for the machine. I bid 999.99 but it sold for 1100.00. I think it was still a good buy.
http://www.ebay.com/itm/RARE-ANTIQUE-ED ... 7675.l2557
			
			
									
									
						http://www.ebay.com/itm/RARE-ANTIQUE-ED ... 7675.l2557
- 
				
				benjaminh
- Victor II
- Posts: 403
- Joined: Tue Sep 01, 2015 8:49 pm
Re: WANTED: Edison Triumph Phonograph
I bid on that one too, but was outbid at the last minute...
			
			
									
									
						- studebakerphonos
- Victor II
- Posts: 306
- Joined: Fri Feb 13, 2015 3:22 pm
- Personal Text: Skilled Craftsman produce radio cabinets at RCA Victor in Camden, N.J. - Thaats my Grand Father
- Location: Eastern PA
Re: WANTED: Edison Triumph Phonograph
Benjamin,
Here is another one : http://www.ebay.com/itm/Edison-Triumph- ... Sw7ehXTgtD
I had a Triumph not too long ago for sale as well..... A real nice one with 2/4 min and the horizontal carriage. Good luck
			
			
									
									
						Here is another one : http://www.ebay.com/itm/Edison-Triumph- ... Sw7ehXTgtD
I had a Triumph not too long ago for sale as well..... A real nice one with 2/4 min and the horizontal carriage. Good luck

- 
				
				stevenhman
- Victor I
- Posts: 124
- Joined: Fri May 06, 2016 1:49 am
- Location: Raleigh, NC
Re: WANTED: Edison Triumph Phonograph
This is pretty close to me: http://raleigh.craigslist.org/atq/5632156921.html
			
			
									
									
						EDISON Oak Triumph Phonograph with Oak Music Master Cygnet Horn - $3000 (Cary, NC)
Coming from my personal collection of Edison Phonographs is this Very Fine example of the Edison Triumph Phonograph. Beautifully constructed in oak with the attractive "Tiger Oak" finish. Edison Decal, black enameled bedplate, and gold Edison stenciling all in Very Good Condition.
The accompanying horn is the desireable and highly sought after Oak Music Master Cygnet horn. The horn shows no sign of damage, splitting, or chips - Excellent Condition!
The wind-up motor is the powerful, long play 3 spring design. The phonograph has the gearing to play both the 2-minute and 4-minute cylinder records. Comes with both the 2 and 4 minute reproducers. Comes with the cylinder shaving attachment, as well. The shaver is used to dress a cylinder for recording (if you have the recording attachment).
The Edison Triumph was produced during the years of 1908-1910 and was consindered Edison's top of the line model and was typically owned by wealthier families. The phonograph is in Excellent Condition and is one of the nicest examples on the market right now, in my opinion. The only thing requiring mention is a small patch on the lid that was performed prior to me owning this Beautiful piece.
The attached picture will demonstrate what an attractive, historical phonograph the Edison is. Add it to your Personal Collection. I also have a few Victor Victrola phonographs.
Smoke-free and Pet-free home located in Cary, NC.
$3,000.00
Also open to a coinage (Numismatic) trade or combination of cash & coin!
- 
				
				benjaminh
- Victor II
- Posts: 403
- Joined: Tue Sep 01, 2015 8:49 pm
Re: WANTED: Edison Triumph Phonograph
Thanks guys,
I'm young, though, and those are both above my price range...
			
			
									
									
						I'm young, though, and those are both above my price range...
- 
				
				ambrola
- Victor IV
- Posts: 1502
- Joined: Sat Dec 29, 2012 11:20 am
- Personal Text: Be Careful What You Say, You Can't T ake It Back!
- Contact:
Re: WANTED: Edison Triumph Phonograph
Both of those are over priced. If you just wait, you can pick up a nice Triumph B or D for under 1000.00. I sold this one for 2000.00 but it had it all. Repeater,Flowered Horn, H & S crane and a steel O.
			
			
									
									
						- Phonolair
- Victor III
- Posts: 616
- Joined: Wed Jan 07, 2009 4:23 pm
- Location: Michigan
Re: WANTED: Edison Triumph Phonograph
Direct Email Sentbenjaminh wrote:I'm looking for an Edison Triumph to use as a workhorse cylinder player.
Requirements:
Must have 2-4 minute attachment
Must have the larger, vertical carriage
Preferably, I'd like one with a nice original finish, both case and bedplate, though I would take a project machine were the price right.
Benjamin
Larry Crandell
- studebakerphonos
- Victor II
- Posts: 306
- Joined: Fri Feb 13, 2015 3:22 pm
- Personal Text: Skilled Craftsman produce radio cabinets at RCA Victor in Camden, N.J. - Thaats my Grand Father
- Location: Eastern PA
- FellowCollector
- Victor V
- Posts: 2083
- Joined: Tue Jul 07, 2009 7:22 pm
- Contact:
Re: WANTED: Edison Triumph Phonograph
This one is a 2 minute Triumph with C reproducer. The OP is looking for a 2/4 minute Triumph with horizontal carriage (see below). FWIW, the Triumph that Ronnie (Amberola) posted a picture of above looks really nice but doesn't have an O reproducer on it (in the picture) as mentioned. If that one sold for 2K with an original steel O reproducer that would have been a very good deal especially with the D repeater.
The Triumph setup that you're looking for with the 2/4 minute and horizontal carriage will be generally a bit pricier since those options were introduced later and were optional "upgrades" for owners of the earlier A and B models which are the most commonly found Triumph models. Triumph model C owners could do the same upgrade but I didn't mention that model since it is highly unlikely that model Triumph will surface especially with those options on it.benjaminh wrote:I'm looking for an Edison Triumph to use as a workhorse cylinder player.
Requirements:
Must have 2-4 minute attachment
Must have the larger, vertical carriage

![[The Talking Machine Forum - For All Antique Phonographs & Recordings]](/styles/we_universal/theme/images/the_talking_machine_forum.png) 
					 
			

