Speaker cone

[claudio luciani]

Does anyone have to sell an 8-inch cone from a speaker with a ¼ coil, it measures 12 Ohms to me

[zipcord]

what is a ¼ coil?

Is it a voice coil assembly glued to the apex of the cone?

A picture is worth 1000 words

[Curt A]

You might have better luck on a radio forum. Most of us are not into electronics - if it doesn't have springs, gears, cranks and acoustic sound, it doesn't make sense...
Try this: https://www.antiqueradios.com/forums/index.php

[claudio luciani]

like this is the cone It is for a 12-15 E number 6060 that the coil was cut and the cone is in the last

[zipcord]

online you will find several choices of "speaker recone kits" - the kit includes the cone w/surround, spider, voice coil assembly, dust cap, tinsel wire and sometimes even the adhesive - I'd guess that you need a 16 Ohn voice coil - be sure to measure your magnetic gap to assure fit and make sure the voice coil has clearances on the inside and outside.

Also clean out you magnetic gap- I use tape triangles made from masking tape

You can probably find someone doing this on YouTube

Good luck

[electrolaman 64]

Claudio, You do not have to replace the speaker cone. You just replaced the leather suspension that is on it. I do this all the time. I will send images to you and Thiago in Facebook Messenger.

Carlton Smith