![[The Talking Machine Forum - For All Antique Phonographs & Recordings]](/styles/we_universal/theme/images/the_talking_machine_forum.png)
The shape of the loop can be made from using a nail, screwdriver of the correct size. It took three tries to bend the loop small enough and have the feet in the correct location.
Curve and flatten the feet. Glued it in place.
It works just fine!
Edison reproducer - limit pin loop
-
Roaring20s
- Victor V
- Posts: 2811
- Joined: Wed Jun 13, 2012 1:55 am
- Personal Text: Those who were seen dancing were thought insane by those who could not hear the music. Nietzsche
- Location: Tucson, AZ
Edison reproducer - limit pin loop
My junk drawer had four different reproducer parts (C & H), so I made a whole one today, with one exception. The limit pin loop was sheared off of the top ... so I made one. I just have basic tools to work with, imagination, and patience.
The shape of the loop can be made from using a nail, screwdriver of the correct size. It took three tries to bend the loop small enough and have the feet in the correct location.
Curve and flatten the feet. Glued it in place.
It works just fine!
James.
The shape of the loop can be made from using a nail, screwdriver of the correct size. It took three tries to bend the loop small enough and have the feet in the correct location.
Curve and flatten the feet. Glued it in place.
It works just fine!
James.
-
tomb
- Victor IV
- Posts: 1426
- Joined: Sat Oct 24, 2015 10:46 pm
- Location: riverside calif
Re: Edison reproducer - limit pin loop
That is a good trick to remember if I need one. What glue did you use to ??
-
Roaring20s
- Victor V
- Posts: 2811
- Joined: Wed Jun 13, 2012 1:55 am
- Personal Text: Those who were seen dancing were thought insane by those who could not hear the music. Nietzsche
- Location: Tucson, AZ
Re: Edison reproducer - limit pin loop
It is J-B Weld Superweld Extreme.