I have a cylinder record cabinet that needs a little work, and I'm never going to get around to it. It's oak, and a decent size, with shelves on hinges that allow them to pivot out for easy access to the cylinders. The cabinet is solid and pretty clean, with some minor wear here and there. One of the pivoting shelves appears to be missing, and none of the "pegs" that hold the cylinders are present, although the rings into which they fit are there and the pegs could be recreated or purchased. I'd like $150 for it, and can bring it to the Wayne NJ phonograph show this April... or you can pick it up from my place in Woodbury, NJ.
I'll snap a few photos later today.
Email me if you're interested... brianu73 at hotmail dot com.
I also still have a super early tabletop VV-X for sale, as well as a really nice and rare upright oversized Aeolian (which is pictured in one of Fabrizio's books), an oak cabinet that matches (for a Victor V), among other things.
Brian
Oak Cylinder Cabinet F/S - Can deliver to Wayne NJ Show
-
- Victor V
- Posts: 2165
- Joined: Wed Jan 07, 2009 3:35 pm
- Personal Text: on instagram as "oncedeadsound"
- Location: just outside Philadelphia, PA
-
- Victor V
- Posts: 2165
- Joined: Wed Jan 07, 2009 3:35 pm
- Personal Text: on instagram as "oncedeadsound"
- Location: just outside Philadelphia, PA
- MordEth
- Victor IV
- Posts: 1159
- Joined: Wed Jan 07, 2009 1:01 pm
- Personal Text: Contact me for TMF tech support.
- Location: Boston, MA
- Contact:
Re: Oak Cylinder Cabinet F/S - Can deliver to Wayne NJ Show
Brian,
Nice photos. Are those metal rings attached to the shelves to keep the cylinders in place? (I know their purpose, I’m merely curious about the construction.)
Nice photos. Are those metal rings attached to the shelves to keep the cylinders in place? (I know their purpose, I’m merely curious about the construction.)
— MordEth
Proudly supporting phonograph discussion boards, hosting phonograph sites and creating phonograph videos since 2007.
Need web hosting or web (or other graphic) design? Support MordEth by using BaseZen Consulting for all of your IT consulting needs.
Want more phonograph discussion? Be sure to visit The Online Edison Phonograph Discussion Board.
Need web hosting or web (or other graphic) design? Support MordEth by using BaseZen Consulting for all of your IT consulting needs.
Want more phonograph discussion? Be sure to visit The Online Edison Phonograph Discussion Board.
-
- Victor V
- Posts: 2165
- Joined: Wed Jan 07, 2009 3:35 pm
- Personal Text: on instagram as "oncedeadsound"
- Location: just outside Philadelphia, PA
Re: Oak Cylinder Cabinet F/S - Can deliver to Wayne NJ Show
no, those rings on the shelves are actually grooves into which those cardboard tubes would fit, the tubes that you could slip the cylinders onto for safer storage.
-
- Victor V
- Posts: 2165
- Joined: Wed Jan 07, 2009 3:35 pm
- Personal Text: on instagram as "oncedeadsound"
- Location: just outside Philadelphia, PA
-
- Victor II
- Posts: 353
- Joined: Thu Jan 08, 2009 3:08 pm
- Location: Somewhere looking for a 9ft Brass Horn
Re: Oak Cylinder Cabinet F/S - Can deliver to Wayne NJ Show
of coarse i log on today after school and for the first time in a few days i look at the "For Sale" section and what do i see? A cylinder cabinate PERFECT for me but its sold.....o well
good job to who ever got it.
Aaron

Aaron
- Brad
- Victor III
- Posts: 939
- Joined: Thu Jan 08, 2009 7:12 pm
- Personal Text: So many phonographs, so little money
- Location: The Garden State
Re: Oak Cylinder Cabinet F/S - Can deliver to Wayne NJ Show
We meet again, Trebek!Aaron wrote:of coarse i log on today after school and for the first time in a few days i look at the "For Sale" section and what do i see? A cylinder cabinate PERFECT for me but its sold.....o wellgood job to who ever got it.
Aaron

Sorry to ace you out again, but I didn't even know the game was on! Hang in there, your day will come.
Why do we need signatures when we are on a first avatar basis?
-
- Victor II
- Posts: 353
- Joined: Thu Jan 08, 2009 3:08 pm
- Location: Somewhere looking for a 9ft Brass Horn
Re: Oak Cylinder Cabinet F/S - Can deliver to Wayne NJ Show
Brad wrote:We meet again, Trebek!Aaron wrote:of coarse i log on today after school and for the first time in a few days i look at the "For Sale" section and what do i see? A cylinder cabinate PERFECT for me but its sold.....o wellgood job to who ever got it.
Aaron![]()
So Brad how many times have you used that saying on me is it 3 now?




Aaron
- Brad
- Victor III
- Posts: 939
- Joined: Thu Jan 08, 2009 7:12 pm
- Personal Text: So many phonographs, so little money
- Location: The Garden State
Re: Oak Cylinder Cabinet F/S - Can deliver to Wayne NJ Show
I may have to wear my cycling helmet with the rear view mirror so I can see you sneaking up behind me. Probably less noticable in a crowded room than an orange hat.
Why do we need signatures when we are on a first avatar basis?
-
- Victor II
- Posts: 353
- Joined: Thu Jan 08, 2009 3:08 pm
- Location: Somewhere looking for a 9ft Brass Horn
Re: Oak Cylinder Cabinet F/S - Can deliver to Wayne NJ Show
ahh...... so your a bike rider...
i am somewhat of one to...because of Boy Scouts... But that wont stop me just remember when some one at the show knocks that hat(or helmet) off your head dont turn around and punch them(me)
We Will Meet Again, Trebek!
Aaron


We Will Meet Again, Trebek!

Aaron