Columbia ID please

Discussions on Talking Machines & Accessories
Post Reply
User avatar
chrisg
Victor III
Posts: 599
Joined: Sat Oct 05, 2013 10:24 am
Location: North Carolina
Contact:

Columbia ID please

Post by chrisg »

I got this columbia ??? at a local consignment shop along with some victor parts ( horn , back bracket tonearm ) that I was informed by the manager that all (victor) the parts are correct for this machine. anyway I think the base is some columbia based phonograph and I took pictures for you. the base measures 9-⅞" square, top motor board is 9" square, mid-section is 8-⅜" and 5" tall I would like to know the model ( ie x, AJ etc ) it so I can look for the arm and support for the front mount. I tried the arms off my AH and they were too long. Thank you for any help you can offer
Attachments
IMAG0535.jpg
IMAG0536.jpg

User avatar
phonogfp
Victor Monarch Special
Posts: 8162
Joined: Wed Jan 07, 2009 5:08 pm
Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
Location: New York's Finger Lakes

Re: Columbia ID please

Post by phonogfp »

You're right - it's a Columbia machine, but manufactured for a client. The cabinet looks like a BL (also used for the Standard Talking Machine X and X2), but the support bracket is like that used on the BA. I would try to get a support arm and traveling arm for a BA. I believe they are available as reproduction from JAS Antiques (ladenjus on eBay).

The turntable looks like a Victor. You shouldn't have much trouble finding parts for this.

Good luck!

George P.

User avatar
Lucius1958
Victor Monarch
Posts: 4100
Joined: Tue Dec 14, 2010 12:17 am
Personal Text: 'Don't take Life so serious, son. It ain't nohow permanent.' - 'POGO'
Location: Where there's "hamburger ALL OVER the highway"...

Re: Columbia ID please

Post by Lucius1958 »

Looks like one of the 'client' machines…

Bill

Phonofreak
Victor VI
Posts: 3720
Joined: Tue Mar 23, 2010 7:00 pm
Location: Western, WA State

Re: Columbia ID please

Post by Phonofreak »

What you have is a Harvard No.1. They were manufactured by Columbia for Sears. They were made from about 1906-9. They sold for $8.75. They used a 7" turntable and all black 14" horn with 8 ½ bell.The horn uses the brass Columbia elbow and unmarked Analyzing reproducer. The tone arm is similar to a Standard X, and the tone arm support is the same size as an AK. The support arm has curlycues instead of Columbia embossed on it. If anybody has a reprinted Sears catalog, please post pictures of the Harvard machines. I don't have the equipment or knowledge to post pictures. The Harvard series are very interesting and unique machines.
Harvey Kravitz

User avatar
chrisg
Victor III
Posts: 599
Joined: Sat Oct 05, 2013 10:24 am
Location: North Carolina
Contact:

Re: Columbia ID please

Post by chrisg »

Thank you ! You guys are the best :D

User avatar
phonogfp
Victor Monarch Special
Posts: 8162
Joined: Wed Jan 07, 2009 5:08 pm
Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
Location: New York's Finger Lakes

Re: Columbia ID please

Post by phonogfp »

Harvey is absolutely right. Now why didn't I think of Harvard? :? :oops:

Hope this helps...

George P.
Attachments
From Sears, Roebuck Catalogue No.116 (1906).
From Sears, Roebuck Catalogue No.116 (1906).

Phonofreak
Victor VI
Posts: 3720
Joined: Tue Mar 23, 2010 7:00 pm
Location: Western, WA State

Re: Columbia ID please

Post by Phonofreak »

George,
Thanks for posting the picture. On another note(pardon the pun), awhile ago, I started a thread about getting kicked out of a Washington state park about getting kicked out for playing a wind up phonograph too loud. The Harvard No.1 shown in the picture was the culprit.
Harvey Kravitz

User avatar
phonogfp
Victor Monarch Special
Posts: 8162
Joined: Wed Jan 07, 2009 5:08 pm
Personal Text: "If you look for the bad in people expecting to find it, you surely will." - A. Lincoln
Location: New York's Finger Lakes

Re: Columbia ID please

Post by phonogfp »

You durn kids and yer loud music! :lol:

George P.

Post Reply