WANTED: Motor for Victor III

[Green Mountain Bill]

Hello All: I recently found a Victor III with an incomplete motor and so am looking for a new, complete motor. If you have one available, please contact me.

Regards,
Green Mountain Bill

IMG_4387sm.jpg (147.35 KiB) Viewed 930 times

[downsouth]

An early model XI with the round metal plate motorboard uses the same motor. The only difference is that the spindle shaft is shorter.

Wes

[rizbone]

I have an early XI with the round metal plate. I'll look at it tonight and send a photo if it's close.

[rizbone]

Here's the one that came from the XI if you think you can use it.

[Phonofreak]

This is the right motor for the Victor III. Don't forget to get the longer spindle.
Harvey Kravitz

[rizbone]

Would the crank be the same, or smaller on the III? This one has an odd sized crank, it is a greater diameter than the earlier female cranks, so the crank from my VTLA or L door won't fit on the threads. It looks like he could swap the winding shaft and the spindle from his current motor if necessary, or I could just include the crank. This is the only one of this style I have seen that wasn't snapped off, which might explain the switch to a male crank.

[downsouth]

That's it. Like I said before and like Harvey said, the spindle is the main difference. Don't forget to swap it out.

Wes