Edison double spring motor problems

Discussions on Talking Machines & Accessories
Post Reply
User avatar
pughphonos
Victor III
Posts: 771
Joined: Tue Jul 17, 2012 12:35 pm
Personal Text: Ms. Pugh
Location: Homewood, Illinois, USA

Edison double spring motor problems

Post by pughphonos »

Hi All!

Time to seriously tap into your experience and expertise.

My double spring Schubert Edisonic has not given me any serious problems these past ten years, though when I cranked it up fully to play Edison Long Play discs it often made random clunking sounds (which I blamed on old grease clumps). Well, today (when I tried the same) it went a step further and now it makes a different sort of sound at much more frequent and even intervals (about once a minute). My guess is that one of the springs has broken or popped off its anchor point while the other one remains functional (as the turntable still spins).

Does this sound familiar to any of you? Am I right in my guess? if so, I've got an expensive repair ahead I'm sure (IF I can find someone to do it); or just buy a replacement Edison double motor (recently regreased this time)--a chunk of change as well. I wouldn't dream of messing with this repair myself.

Any advice/comments/similar experiences?

Mindy P.

P.S. Nice thing about the double spring is you can get through a standard disc with very little loss of speed--and of course it's even more needed with long play discs. I'll see what any of you have to say and then plot my next steps.
"You must serve music, because music is so enormous and can envelop you into such a state of perpetual anxiety and torture--but it is our first and main duty"
-- Maria Callas, 1968 interview.

Damfino59
Victor II
Posts: 495
Joined: Thu Feb 14, 2013 8:37 pm
Location: Stillman Valley, IL

Re: Edison double spring motor problems

Post by Damfino59 »

Diamond Disc springs are not for those “faint of heart”.

Try Ron Haring

The Victrola Man

[email protected]

17024 Frazier Road Rd.

Plano Il 60545

630-552-1558

Maybe you could just bring him the spring barrels. But either way you’re going to have to deal with a lot of “heavy metal” Diamond Disc mechanism.

User avatar
pughphonos
Victor III
Posts: 771
Joined: Tue Jul 17, 2012 12:35 pm
Personal Text: Ms. Pugh
Location: Homewood, Illinois, USA

Re: Edison double spring motor problems

Post by pughphonos »

Damfino59 wrote: Tue Oct 10, 2023 11:13 pm Diamond Disc springs are not for those “faint of heart”.

Try Ron Haring

The Victrola Man

[email protected]

17024 Frazier Road Rd.

Plano Il 60545

630-552-1558

Maybe you could just bring him the spring barrels. But either way you’re going to have to deal with a lot of “heavy metal” Diamond Disc mechanism.
I was thinking that Ron would probably be my best option. I bought the Schubert from him back in October 2013 and bought a Chalet from him a few weeks age. All roads eventually lead to Plano when you're in this hobby.
"You must serve music, because music is so enormous and can envelop you into such a state of perpetual anxiety and torture--but it is our first and main duty"
-- Maria Callas, 1968 interview.

Post Reply